Skip to content
FiftyCalc Free calculators for all 50 states

3D Printer Buy vs Outsource Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

See after how many parts a 3D printer pays for itself compared with sending the same parts to a printing service.

Result

Sample figures

Break-even number of parts—

Saving per part when printing yourself ($) —

  • Payback time (months)—
  • Total cost of buying, over the printer's life ($)—
  • Total cost of outsourcing, same period ($)—
  • Saving from buying over the printer's life ($)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

3D Printer Buy vs Outsource Calculator

Printer price, with setup (example), in dollars: enter 0 or more. Prefilled example: 1,500.

Your cost per part: material, power, failed prints, in dollars: enter 0 or more. Prefilled example: 3.

Print service price per part, with shipping (example), in dollars: enter 0 or more. Prefilled example: 18.

Parts needed per year: enter 0 or more. Prefilled example: 200.

Printer service life, in years: enter a number from 0.5 to 20. Prefilled example: 3.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for filament for desktop printers. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Printer price, with setup (example), in dollars: enter 0 or more.
  2. Your cost per part: material, power, failed prints, in dollars: enter 0 or more.
  3. Print service price per part, with shipping (example), in dollars: enter 0 or more.
  4. Parts needed per year: enter 0 or more.
  5. Printer service life, in years: enter a number from 0.5 to 20.
  6. Read the result: Break-even number of parts; the panel also shows Saving per part when printing yourself ($), Payback time (months), Total cost of buying, over the printer's life ($), Total cost of outsourcing, same period ($) and Saving from buying over the printer's life ($).

How this calculator works

Break-even parts = printer price ÷ (service price per part − your own cost per part), rounded up. Payback (months) = printer price ÷ (saving per part × parts per year ÷ 12).

Total cost of buying = printer price + own cost per part × parts per year × years; total cost of outsourcing = service price × parts per year × years. This is a standard make-or-buy break-even comparison; your time spent printing is not counted.

The formula

  1. Sav=out−own
  2. Be=ceil⁡(prSav)
Symbols used in the formula
SymbolMeaningUnit
prPrinter price, with setup (example)$
ownYour cost per part: material, power, failed prints$
outPrint service price per part, with shipping (example)$
SavSaving per part when printing yourself$
BeBreak-even number of parts
ceil(x)the smallest whole number not below x.

Worked example

Printer price, with setup (example)$1,500
Your cost per part: material, power, failed prints$3
Print service price per part, with shipping (example)$18
Parts needed per year200
Printer service life3 years
Saving per part when printing yourself ($)$15.00
Payback time (months)6.0
Total cost of buying, over the printer's life ($)$3,300
Total cost of outsourcing, same period ($)$10,800
Saving from buying over the printer's life ($)$7,500
  1. Sav=18−3=15
  2. Be=ceil⁡(1,50015)=100

Break-even number of parts 100

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

When is buying a 3D printer worth it?

When you will print more parts than the break-even count during the printer's life. With a $1,500 printer, $3 of material per part and an $18 service price, that is 100 parts.

What costs should I include per part?

Filament or resin, electricity, failed prints and spare parts such as nozzles. Service quotes should include shipping.

Related calculators