Skip to content
FiftyCalc Free calculators for all 50 states

Flow Rate Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Volumetric flow rate is the volume of fluid that passes through a pipe each second. Enter the pipe's inside diameter and the flow velocity.

Result

Sample figures

Flow rate (US gallons per minute)—

Cross-section area (m²) —

  • Flow rate (m³/s)—
  • Flow rate (liters per minute)—
  • Flow rate (cubic feet per second)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Flow Rate Calculator

Inside diameter of the pipe: enter 0 or more. Prefilled example: 2.

Diameter unit

Diameter unit: choose Inches (in) or Millimeters (mm). Prefilled example: Inches (in).

Average flow velocity: enter 0 or more. Prefilled example: 5.

Velocity unit

Velocity unit: choose Feet per second (ft/s) or Meters per second (m/s). Prefilled example: Feet per second (ft/s).

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Inside diameter of the pipe: enter 0 or more.
  2. Diameter unit: choose Inches (in) or Millimeters (mm).
  3. Average flow velocity: enter 0 or more.
  4. Velocity unit: choose Feet per second (ft/s) or Meters per second (m/s).
  5. Read the result: Flow rate (US gallons per minute); the panel also shows Cross-section area (m²), Flow rate (m³/s), Flow rate (liters per minute) and Flow rate (cubic feet per second).

How this calculator works

Volumetric flow rate Q = A × v, where A is the inside cross-section of the pipe (A = π × d² ÷ 4 for a round pipe) and v the average velocity of the fluid. This is the continuity equation of fluid mechanics.

Conversions (NIST): 1 in = 0.0254 m, 1 ft = 0.3048 m, 1 US gallon = 0.003785411784 m³, 1 ft³ = 0.028316846592 m³.

The formula

  1. A=π×(d×du)24
  2. Q=A×vel×vu
  3. Gpm=Q0.003785411784×60
Symbols used in the formula
SymbolMeaningUnit
dInside diameter of the pipe
duDiameter unit
velAverage flow velocity
vuVelocity unit
ACross-section aream²
QFlow rate (m³/s)
GpmFlow rateUS gallons per minute

Worked example

Inside diameter of the pipe2
Diameter unitInches (in)
Average flow velocity5
Velocity unitFeet per second (ft/s)
Cross-section area (m²)0.002
Flow rate (m³/s)0.0031
Flow rate (liters per minute)185.3333
Flow rate (cubic feet per second)0.1091
  1. A=3.14159×(2×0.0254)24=0.00202683
  2. Q=0.00202683×5×0.3048=0.00308889
  3. Gpm=0.003088890.003785411784×60=48.9599

Flow rate (US gallons per minute) 48.9599

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How do I convert flow velocity to GPM?

Multiply the velocity by the pipe's inside area to get a volume per second, then convert to gallons and multiply by 60.

Why use the inside diameter?

Only the open bore carries fluid. The wall thickness differs between pipe schedules, so the nominal size is not the bore.

Related calculators