Skip to content
FiftyCalc Free calculators for all 50 states

PC Power Consumption Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the power each part draws under the load you care about, how many hours a day the computer runs and your electricity rate. You get the draw at the wall, the energy per day and the cost per month and per year.

Result

Sample figures

Power drawn at the wall, monitor included—W

Power delivered by the power supply to the parts (W) —

  • Energy per day (kWh)—
  • Cost per 30-day month—
  • Cost per year—
  • Power supply rating for that share (W)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

PC Power Consumption Calculator

Processor (CPU) power, in W: enter 0 or more. Prefilled example: 125.

Graphics card (GPU) power, in W: enter 0 or more. Prefilled example: 220.

Motherboard, memory, drives, fans (W): enter 0 or more. Prefilled example: 75.

Monitor(s) on their own outlet (W): enter 0 or more. Prefilled example: 30.

Hours of use per day: enter a number from 0 to 24. Prefilled example: 4.

Power supply efficiency at that load, in percent: enter a number from 50 to 100. Prefilled example: 88.

Electricity rate (from your bill), in dollars / kWh: enter 0 or more. Prefilled example: 0.16.

Highest share of the power supply rating you want to use, in percent: enter a number from 10 to 100. Prefilled example: 80.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Processor (CPU) power, in W: enter 0 or more.
  2. Graphics card (GPU) power, in W: enter 0 or more.
  3. Motherboard, memory, drives, fans (W): enter 0 or more.
  4. Monitor(s) on their own outlet (W): enter 0 or more.
  5. Hours of use per day: enter a number from 0 to 24.
  6. Power supply efficiency at that load, in percent: enter a number from 50 to 100.
  7. Electricity rate (from your bill), in dollars / kWh: enter 0 or more.
  8. Highest share of the power supply rating you want to use, in percent: enter a number from 10 to 100.
  9. Read the result: Power drawn at the wall, monitor included; the panel also shows Power delivered by the power supply to the parts (W), Energy per day (kWh), Cost per 30-day month, Cost per year and Power supply rating for that share (W).

How this calculator works

Parts load (W) = CPU + GPU + other parts. The power supply converts wall power to the low voltages the parts use, so wall power = parts load ÷ efficiency; a monitor plugged into its own outlet is added as it is.

Energy (kWh per day) = wall watts × hours ÷ 1,000. Cost = kWh × your rate, for 30 days or 365 days.

Power supply rating = parts load ÷ the share of the rating you want to use. The share is your choice; it leaves room for power spikes and keeps the supply in its efficient range.

Use the power each part really draws: a measured figure from a review or a software reading under the same task. Rated maximums (TDP, total board power) overstate typical use. The default values are an example, not measurements.

The formula

  1. Dc=cpu+gpu+o
  2. W=Dceff÷100+mon
Symbols used in the formula
SymbolMeaningUnit
cpuProcessor (CPU) powerW
gpuGraphics card (GPU) powerW
oMotherboard, memory, drives, fansW
monMonitor(s) on their own outletW
effPower supply efficiency at that load%
DcPower delivered by the power supply to the partsW
WPower drawn at the wall, monitor includedW

Worked example

Processor (CPU) power125 W
Graphics card (GPU) power220 W
Motherboard, memory, drives, fans (W)75
Monitor(s) on their own outlet (W)30
Hours of use per day4
Power supply efficiency at that load88%
Electricity rate (from your bill)$0.16 / kWh
Highest share of the power supply rating you want to use80%
Power delivered by the power supply to the parts (W)420
Energy per day (kWh)2.03
Cost per 30-day month$9.74
Cost per year$118
Power supply rating for that share (W)525
  1. Dc=125+220+75=420
  2. W=42088÷100+30=507.273

Power drawn at the wall, monitor included 507 W

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How do I measure my PC's real power use?

Plug the computer into a plug-in power meter for a few days of normal use; it shows watts and kWh at the wall, losses included.

Does a bigger power supply use more electricity?

No. The parts draw the power they need; a larger supply only changes the efficiency at that load, which its maker publishes as an efficiency curve.

What about idle and sleep?

Run the calculator once for gaming or work hours and once for idle hours with lower part power, and add the two costs.

Related calculators