Skip to content
FiftyCalc Free calculators for all 50 states

Hydrostatic Pressure Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Work out the pressure a column of liquid exerts at a given depth, as gauge pressure and as absolute pressure with the air above it.

Result

Sample figures

Gauge pressure—kPa

Absolute pressure (kPa) —

  • Gauge pressure (psi)—
  • Absolute pressure (psi)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Hydrostatic Pressure Calculator

Fluid density (kg/m³): enter 0 or more. Prefilled example: 1,000.

Depth: enter 0 or more. Prefilled example: 10.

Depth unit

Depth unit: choose Meters (m) or Feet (ft). Prefilled example: Meters (m).

Gravitational acceleration, in m/s²: enter 0 or more. Prefilled example: 9.80665.

Pressure at the surface, in kPa: enter 0 or more. Prefilled example: 101.325.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Fluid density (kg/m³): enter 0 or more.
  2. Depth: enter 0 or more.
  3. Depth unit: choose Meters (m) or Feet (ft).
  4. Gravitational acceleration, in m/s²: enter 0 or more.
  5. Pressure at the surface, in kPa: enter 0 or more.
  6. Read the result: Gauge pressure; the panel also shows Absolute pressure (kPa), Gauge pressure (psi) and Absolute pressure (psi).

How this calculator works

Hydrostatic pressure P = ρ × g × h, where ρ is the fluid density, g the gravitational acceleration and h the depth below the free surface. It follows from the balance of forces on a fluid column at rest (Pascal's principle) and does not depend on the shape of the container.

Absolute pressure = gauge pressure + the pressure at the surface. The default 101.325 kPa is the standard atmosphere and 9.80665 m/s² the standard acceleration of gravity, both exact defined values (CODATA 2022 values from NIST (physics.nist.gov/cuu/Constants/Table/allascii.txt, read October 27, 2026)).

Conversions: 1 ft = 0.3048 m and 1 psi = 6,894.757 Pa (NIST SP 811, Appendix B.9 (nist.gov/pml/special-publication-811, read October 27, 2026)).

The formula

  1. Pg=ρ×g×h×hu1,000
Symbols used in the formula
SymbolMeaningUnit
ρFluid densitykg/m³
hDepth
huDepth unit
gGravitational accelerationm/s²
PgGauge pressurekPa

Worked example

Fluid density (kg/m³)1,000
Depth10
Depth unitMeters (m)
Gravitational acceleration9.80665 m/s²
Pressure at the surface101.325 kPa
Absolute pressure (kPa)199.3915
Gauge pressure (psi)14.2233
Absolute pressure (psi)28.9193
  1. Pg=1,000×9.80665×10×11,000=98.0665

Gauge pressure 98.0665 kPa

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the pressure 10 meters under fresh water?

About 98.07 kPa (14.22 psi) of gauge pressure from the water, or about 199.4 kPa absolute with the standard atmosphere on top.

Does the shape of the tank change the pressure?

No. At a given depth the pressure depends only on the fluid density, gravity and the depth, not on the width or shape of the container.

Related calculators