Skip to content
FiftyCalc Free calculators for all 50 states

3D Printing Cost Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Estimate the material and electricity cost of a 3D print. Prices are examples: enter your own.

Result

Sample figures

Total print cost—

  • Filament cost—
  • Electricity cost—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

3D Printing Cost Calculator

Filament used, in g: enter 0 or more. Prefilled example: 120.

Filament price ($ per kg, example): enter 0 or more. Prefilled example: 22.

Print time, in hours: enter 0 or more. Prefilled example: 6.

Average printer power, in W: enter 0 or more. Prefilled example: 150.

Electricity rate (example), in dollars / kWh: enter 0 or more. Prefilled example: 0.17.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for filament for desktop printers. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Filament used, in g: enter 0 or more.
  2. Filament price ($ per kg, example): enter 0 or more.
  3. Print time, in hours: enter 0 or more.
  4. Average printer power, in W: enter 0 or more.
  5. Electricity rate (example), in dollars / kWh: enter 0 or more.
  6. Read the result: Total print cost; the panel also shows Filament cost and Electricity cost.

How this calculator works

Filament cost = grams used ÷ 1,000 × price per kilogram. Your slicer reports the grams for each print.

Electricity cost = hours × average watts ÷ 1,000 × price per kWh. A heated bed and hot end draw more while heating up, so a plug-in power meter gives the best average.

The formula

  1. Mat=g1,000×s
  2. En=h×w1,000×kwh
  3. T=Mat+En
Symbols used in the formula
SymbolMeaningUnit
gFilament usedg
sFilament price (example)$ per kg
hPrint timehours
wAverage printer powerW
kwhElectricity rate (example)$ / kWh
MatFilament cost$
EnElectricity cost$
TTotal print cost$

Worked example

Filament used120 g
Filament price ($ per kg, example)22
Print time6 hours
Average printer power150 W
Electricity rate (example)$0.17 / kWh
Filament cost$2.64
Electricity cost$0.15
  1. Mat=1201,000×22=2.64
  2. En=6×1501,000×0.17=0.153
  3. T=2.64+0.153=2.793

Total print cost $2.79

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How much does a 3D print cost in filament?

At $22 per kilogram, a 120-gram print uses $2.64 of filament.

Does electricity add much to a 3D print?

Usually little: 6 hours at 150 W is 0.9 kWh, about 15 cents at 17 cents per kWh.

Related calculators