How Do You Calculate Speed?
To calculate speed, divide the distance traveled by the time it took: NASA's Glenn Research Center writes the general rate equation as rate times time equals amount, d = V × t. In NASA's example, the amount is the distance flown, the rate is the ground speed and the time is the time aloft. Rearranged, the same equation gives the speed as the distance divided by the time, V = d ÷ t. NASA notes that a real aircraft's flight is not conducted at a single ground speed but varies from zero at takeoff to cruise conditions and back to zero at landing. The speed calculator divides the distance you enter by the whole time you enter, so its result is the average speed over that time, whatever the speed was at each moment.
By FiftyCalc · Updated November 14, 2026, first published November 14, 2026
How it is calculated
Measure the distance traveled and the time it took, in matching units, such as miles and hours or kilometers and hours. NASA uses the rate equation with a constant ground speed to determine how far a cruising aircraft flies in a given span of time. Divide the distance by the time: 120 miles in 2 hours gives 120 ÷ 2 = 60 miles per hour.
Multiplying the speed by the time gives the distance back, which is how NASA finds the distance an airplane flies. NASA computes the maximum range of an aircraft the same way, as the ground speed times the maximum time aloft.
Speed in a given direction is a velocity, and NASA calls the velocity of an object measured relative to the ground its ground speed, a vector quantity. To properly define a velocity, it is necessary to pick a fixed reference point and measure velocities relative to that point. In NASA's Wright brothers example, with a 35 mph airspeed and a 25 mph headwind, the ground speed at liftoff is only 10 mph.
In the calculator, you enter a distance in miles or kilometers and the time in hours, minutes and seconds. It shows the average speed in miles per hour, kilometers per hour and meters per second, and the pace in decimal minutes per mile and per kilometer. For 26.2 miles in 4 hours, it shows 6.55 mph and a pace of 9.16 minutes per mile, in decimal minutes. For 10 kilometers in 50 minutes, it shows 12.00 km/h and a pace of 5.00 minutes per kilometer.
Worked example
Assumptions: a car covers 120 miles in 2 hours, including any stops along the way. Dividing the distance by the whole time entered, stops included, its average speed is 120 ÷ 2 = 60 miles per hour, even if it went faster or slower at times. The calculator shows 60.00 mph, 96.56 km/h and 26.82 m/s.
| Distance | 120 |
|---|---|
| Distance unit | Miles |
| Time: hours | 2 |
| Time: minutes | 0 |
| Time: seconds | 0 |
| Speed | 60.00 mph |
|---|---|
| Speed (km/h) | 96.56 |
| Speed (m/s) | 26.82 |
Figures computed by this site's calculator from the inputs above. Run your own numbers: Speed Calculator
Frequently asked questions
How do you calculate average speed?
The calculator divides the total distance you enter by the total time you enter, so if that time includes stops, the average includes them; the speed at any moment may be higher or lower.
What is the difference between speed and velocity?
NASA treats velocity as a vector quantity, with both a magnitude and a direction: a 20 mph wind from the west is different from a 20 mph wind from the east. The speed calculator gives only the size of the speed, from a distance and a time, without a direction.
Sources
- Range – Constant Velocity (Beginner's Guide to Aeronautics) NASA Glenn Research Center page dated 2025-07-02, checked on 2026-11-13
- Relative Velocity (Beginner's Guide to Aeronautics) NASA Glenn Research Center page dated 2023-01-21, checked on 2026-11-13
General information drawn from the official sources above, not tax or legal advice. Amounts change from year to year: check the source for your tax year.