Skip to content
FiftyCalc Free calculators for all 50 states

Centrifuge Speed Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Protocols give a force in × g, but centrifuges are set in RPM, and the link depends on the rotor radius. Enter the radius, then the speed or the force you need.

Result

Sample figures

Relative centrifugal force at that RPM (× g)—

RPM needed for the required force —

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Centrifuge Speed Calculator

Rotor radius, center to sample, in cm: enter 0.1 or more. Prefilled example: 10.

Speed, in RPM: enter 0 or more. Prefilled example: 3,000.

Required force (RCF, × g): enter 0 or more. Prefilled example: 1,000.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Rotor radius, center to sample, in cm: enter 0.1 or more.
  2. Speed, in RPM: enter 0 or more.
  3. Required force (RCF, × g): enter 0 or more.
  4. Read the result: Relative centrifugal force at that RPM (× g); the panel also shows RPM needed for the required force.

How this calculator works

RCF = ω² r ÷ g, with ω = 2π × RPM ÷ 60, r the radius in meters and g = 9.80665 m/s², the standard acceleration of gravity (CODATA 2022 values published by NIST (physics.nist.gov/cuu/Constants, read 2026-10-27)). This works out to the familiar RCF = 1.118 × 10⁻⁵ × r (cm) × RPM².

Turned around: RPM = (60 ÷ 2π) × √(RCF × g ÷ r). Use the radius to the sample (often the maximum radius given for the rotor).

The formula

  1. Rcf=(2×π×rpm÷60)2×r÷1009.80665
Symbols used in the formula
SymbolMeaningUnit
rRotor radius, center to samplecm
rpmSpeedRPM
RcfRelative centrifugal force at that RPM (× g)

Worked example

Rotor radius, center to sample10 cm
Speed3,000 RPM
Required force (RCF, × g)1,000
RPM needed for the required force2,990
  1. Rcf=(2×3.14159×3,000÷60)2×10÷1009.80665=1,006.42

Relative centrifugal force at that RPM (× g) 1,006

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many g is 3,000 RPM?

With a 10 cm radius, about 1,006 × g.

Why can't I just copy the RPM from a protocol?

The force depends on the radius: the same RPM on a larger rotor gives more g.

Related calculators