Skip to content
FiftyCalc Free calculators for all 50 states

Floor Area Ratio Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the gross floor area of all floors and the lot area; add the FAR limit of your zoning district to see how much floor area is left.

Result

Sample figures

Floor area ratio (FAR)—

Maximum floor area at the limit (square feet) —

  • Floor area left under the limit (square feet; negative = over)—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Floor Area Ratio Calculator

Units: switches the fields between the two unit systems.

Gross floor area, all floors, in sq ft: enter 0 or more. Prefilled example: 3,000.

Lot area, in sq ft: enter 1 or more. Prefilled example: 6,000.

FAR limit of the zoning district: enter 0 or more. Prefilled example: 0.5.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Gross floor area, all floors, in sq ft: enter 0 or more.
  3. Lot area, in sq ft: enter 1 or more.
  4. FAR limit of the zoning district: enter 0 or more.
  5. Read the result: Floor area ratio (FAR); the panel also shows Maximum floor area at the limit (square feet) and Floor area left under the limit (square feet; negative = over).

How this calculator works

Floor area ratio = gross floor area of the building ÷ area of the lot. A FAR of 0.5 on a 6,000 square foot lot allows 3,000 square feet of floor area, whether on one floor or spread over several.

What counts as floor area (basements, garages, attics) is set by each local zoning code; check its definition before using the result.

The formula

  1. Far=gfalot
Symbols used in the formula
SymbolMeaningUnit
gfaGross floor area, all floorssq ft
lotLot areasq ft
FarFloor area ratio (FAR)

Worked example

Gross floor area, all floors3,000 sq ft
Lot area6,000 sq ft
FAR limit of the zoning district0.5
Maximum floor area at the limit (square feet)3,000
Floor area left under the limit (square feet; negative = over)0
  1. Far=3,0006,000=0.5

Floor area ratio (FAR) 0.5

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What does a FAR of 2 mean?

The building's total floor area may be twice the lot area: on a 5,000 square foot lot, 10,000 square feet, for example 4 floors of 2,500.

Is FAR the same as lot coverage?

No. Lot coverage counts only the building footprint; FAR counts every floor.

Questions answered

Related calculators