Skip to content
FiftyCalc Free calculators for all 50 states

Laser Beam Divergence Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Measure the beam diameter at two distances to find how fast a laser beam spreads, and compare with the diffraction limit of its waist.

Result

Sample figures

Measured full-angle divergence (mrad)—

Measured full-angle divergence (degrees) —

  • Divergence from the waist, 4M²λ ÷ (πD₀) (mrad)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Laser Beam Divergence Calculator

Beam diameter at the first point, in mm: enter 0 or more. Prefilled example: 2.

Beam diameter at the second point, in mm: enter 0 or more. Prefilled example: 5.

Distance between the two points, in m: enter 0 or more. Prefilled example: 3.

Wavelength, in nm: enter 0 or more. Prefilled example: 633.

Beam waist diameter, in mm: enter 0 or more. Prefilled example: 0.8.

Beam quality factor M²: enter 1 or more. Prefilled example: 1.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Beam diameter at the first point, in mm: enter 0 or more.
  2. Beam diameter at the second point, in mm: enter 0 or more.
  3. Distance between the two points, in m: enter 0 or more.
  4. Wavelength, in nm: enter 0 or more.
  5. Beam waist diameter, in mm: enter 0 or more.
  6. Beam quality factor M²: enter 1 or more.
  7. Read the result: Measured full-angle divergence (mrad); the panel also shows Measured full-angle divergence (degrees) and Divergence from the waist, 4M²λ ÷ (πD₀) (mrad).

How this calculator works

Full-angle divergence from two measurements: θ = 2 × arctan((D₂ − D₁) ÷ (2 × z)), with D₁ and D₂ the beam diameters measured a distance z apart in the far field.

For a Gaussian beam, the far-field full angle is θ = 4 × M² × λ ÷ (π × D₀), with D₀ the waist diameter and M² the beam quality factor (1 for a perfect Gaussian beam, ISO 11146). Diameters are measured at 1/e² intensity.

The formula

  1. Th=2×atan⁡(d2−d12×z×1,000)×1,000
Symbols used in the formula
SymbolMeaningUnit
d1Beam diameter at the first pointmm
d2Beam diameter at the second pointmm
zDistance between the two pointsm
ThMeasured full-angle divergence (mrad)

Worked example

Beam diameter at the first point2 mm
Beam diameter at the second point5 mm
Distance between the two points3 m
Wavelength633 nm
Beam waist diameter0.8 mm
Beam quality factor M²1
Measured full-angle divergence (degrees)0.0573
Divergence from the waist, 4M²λ ÷ (πD₀) (mrad)1.0075
  1. Th=2×atan⁡(5−22×3×1,000)×1,000=1

Measured full-angle divergence (mrad) 1

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

Why does a wider beam diverge less?

Diffraction spreads a beam by an angle inversely proportional to its waist size, which is why beam expanders are used before long paths.

Is the result a full angle or a half angle?

A full angle. Some datasheets quote the half angle, which is half this value.

Related calculators