What Is the Circumference Formula?
The circumference formula is C = π × d, where d is the diameter, or C = 2 × π × r, where r is the radius. The National Institute of Standards and Technology (NIST) gives the circumference of a circle as 3.1416 × diameter. The coefficient 3.1416 is an approximation of pi, which NIST describes as the ratio of a circle's circumference to its diameter. Because the diameter is twice the radius, 2 × π × r and π × d give the same length. For a diameter of 10, the calculator shows a circumference of 31.4159; using NIST's rounded coefficient gives 31.416.
By FiftyCalc · Updated November 11, 2026, first published November 11, 2026
Open the Circumference Calculator
How it is calculated
Measure in a single unit: NIST advises expressing all dimensions in terms of the same unit. Circumference is a distance, the distance around the edge of a circle, so a diameter in inches gives a circumference in inches.
Find the diameter: it is any straight line through the center of the circle from edge to edge, and it is twice the radius. If you know a radius of 6 inches, the diameter is 6 × 2 = 12 inches.
Multiply the diameter by pi: for the diameter of 6 × 2 = 12 inches, using NIST's rounded coefficient gives 3.1416 × 12 = 37.6992 inches. For a radius of 6 inches, the calculator shows 37.6991 inches; the difference reflects the rounded coefficient and the rounding of the calculator's result.
To go back from a circumference to a diameter, divide the circumference by pi. NIST's own example is the Earth: a circumference of 40,075 kilometers at the equator gives a diameter of approximately 12,756 kilometers. Entered as a circumference, 40,075 gives a diameter of 12,756.2687 in the calculator.
Worked example
Assumptions: a circle with a radius of 6 inches, measured in inches. The diameter is 6 × 2 = 12 inches, and using NIST's rounded coefficient gives 3.1416 × 12 = 37.6992 inches. The calculator shows a circumference of 37.6991 inches; the difference reflects the rounded coefficient and the rounding of the calculator's result.
| The value you know is the | Radius |
|---|---|
| Value | 6 |
| Radius | 6 |
|---|---|
| Diameter | 12 |
| Circumference | 37.6991 |
Figures computed by this site's calculator from the inputs above. Run your own numbers: Circumference Calculator
Frequently asked questions
What is the circumference of a circle with a radius of 3?
With a radius of 3, the calculator shows a circumference of 18.8496, in the same unit as the radius.
Is circumference the same as perimeter?
Circumference is the perimeter of a circle: NIST defines it as the distance around the edge of a circle, a type of perimeter.
How do I find the radius from the circumference?
Divide the circumference by pi to get the diameter, then divide it by 2, since the diameter is twice the radius.
Sources
- Circumference, Area and Volume National Institute of Standards and Technology (NIST), Office of Weights and Measures checked on 2026-11-09
General information drawn from the official sources above, not tax or legal advice. Amounts change from year to year: check the source for your tax year.