Skip to content
FiftyCalc Free calculators for all 50 states

Mil Converter

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Enter a thickness in mils (thou), the unit used for plastic sheeting, coatings and wire insulation. A mil is not a millimeter.

Result

Sample figures

Millimeters—mm

Inches (in) —

  • Micrometers (µm)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Mil Converter

Thickness, in mil: enter 0 or more. Prefilled example: 6.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Thickness, in mil: enter 0 or more.
  2. Read the result: Millimeters; the panel also shows Inches (in) and Micrometers (µm).

How this calculator works

1 mil = 0.001 inch = 0.0254 mm = 25.4 micrometers, all exact (NIST Handbook 44 (2026), Appendix C, General Tables of Units of Measurement (nist.gov/pml/owm, read 2026-10-27); NIST SP 811, Appendix B.8 (nist.gov/pml/special-publication-811, read 2026-10-27)).

The formula

  1. Mm=mil×0.0254
Symbols used in the formula
SymbolMeaningUnit
milThicknessmil
MmMillimetersmm

Worked example

Thickness6 mil
Inches (in)0.006
Micrometers (µm)152.4
  1. Mm=6×0.0254=0.1524

Millimeters 0.1524 mm

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How thick is 6 mil plastic in mm?

0.1524 mm (0.006 in).

How many mm is 20 mil?

0.508 mm.

Questions answered

Related calculators