Skip to content
FiftyCalc Free calculators for all 50 states

Paper Thickness Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Measure the height of a stack (a ream is easiest), then enter the height and the number of sheets.

Result

Sample figures

Thickness of one sheet—mm

Thickness (microns, µm) —

  • Thickness (inches)—
  • Thickness (mils, thousandths of an inch)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Paper Thickness Calculator

Stack height unit

Stack height unit: choose inches or millimeters. Prefilled example: inches.

Stack height: enter 0 or more. Prefilled example: 2.

Number of sheets in the stack: enter 1 or more. Prefilled example: 500.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Stack height unit: choose inches or millimeters.
  2. Stack height: enter 0 or more.
  3. Number of sheets in the stack: enter 1 or more.
  4. Read the result: Thickness of one sheet; the panel also shows Thickness (microns, µm), Thickness (inches) and Thickness (mils, thousandths of an inch).

How this calculator works

Sheet thickness (caliper) = stack height ÷ number of sheets. Measuring a whole ream averages out the small variations between sheets.

1 inch = 25.4 mm exactly (NIST SP 811, Appendix B.9 (https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9, read October 27, 2026)); 1 mil = 0.001 inch.

The formula

  1. Mm=h×un
Symbols used in the formula
SymbolMeaningUnit
uStack height unit
hStack height
nNumber of sheets in the stack
MmThickness of one sheetmm

Worked example

Stack height unitinches
Stack height2
Number of sheets in the stack500
Thickness (microns, µm)101.6
Thickness (inches)0.004
Thickness (mils, thousandths of an inch)4
  1. Mm=2×25.4500=0.1016

Thickness of one sheet 0.1016 mm

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How thick is one sheet if a 500-sheet ream is 2 inches?

0.004 inch (4 mils), or 0.1016 mm.

Why measure many sheets instead of one?

A single sheet is too thin for a ruler; dividing a stack keeps the measuring error small.

Questions answered

Related calculators