Skip to content
FiftyCalc Free calculators for all 50 states

Solar Panel Wattage Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the Vmp and Imp printed on the panel's label to get its rated wattage, then see how much energy it makes with your sun hours.

Result

Sample figures

Panel wattage at STC—W

Energy per day, all panels (kWh) —

  • Energy per month, all panels (kWh)—
  • Energy per year, all panels (kWh)—
  • Panel efficiency—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Solar Panel Wattage Calculator

Units: switches the fields between the two unit systems.

Maximum-power voltage, Vmp, in V: enter 0 or more. Prefilled example: 41.5.

Maximum-power current, Imp, in A: enter 0 or more. Prefilled example: 9.64.

Number of panels: enter 1 or more. Prefilled example: 1.

Peak sun hours per day: enter a number from 0 to 12. Prefilled example: 4.5.

System losses, in percent: enter a number from 0 to 60. Prefilled example: 14.

Panel area, in m²: enter 0.1 or more. Prefilled example: 1.95.

Affiliate link

This is an affiliate link: FiftyCalc may earn a commission if you buy through it. This does not change the result.

ALLPOWERS sells portable power stations and portable solar panels. Visit ALLPOWERS

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Maximum-power voltage, Vmp, in V: enter 0 or more.
  3. Maximum-power current, Imp, in A: enter 0 or more.
  4. Number of panels: enter 1 or more.
  5. Peak sun hours per day: enter a number from 0 to 12.
  6. System losses, in percent: enter a number from 0 to 60.
  7. Panel area, in m²: enter 0.1 or more.
  8. Read the result: Panel wattage at STC; the panel also shows Energy per day, all panels (kWh), Energy per month, all panels (kWh), Energy per year, all panels (kWh) and Panel efficiency.

How this calculator works

Rated power P (W) = Vmp × Imp, the voltage and current at the maximum power point measured under Standard Test Conditions (STC: 1,000 W/m² of sunlight, 25 °C cell temperature, defined in IEC 61215 and IEC 60904).

Daily energy (kWh) = P × number of panels × peak sun hours × (1 − losses) ÷ 1,000. 14% losses is the default of the PVWatts model of the National Laboratory of the Rockies (wiring, inverter, soiling, shading). Month = day × 365 ÷ 12; year = day × 365.

Efficiency = P ÷ (panel area in m² × 1,000 W/m²), the share of STC sunlight turned into electricity.

The formula

  1. W=vmp×imp
Symbols used in the formula
SymbolMeaningUnit
vmpMaximum-power voltage, VmpV
impMaximum-power current, ImpA
WPanel wattage at STCW

Worked example

Maximum-power voltage, Vmp41.5 V
Maximum-power current, Imp9.64 A
Number of panels1
Peak sun hours per day4.5
System losses14%
Panel area1.95 m²
Energy per day, all panels (kWh)1.5482
Energy per month, all panels (kWh)47
Energy per year, all panels (kWh)565
Panel efficiency20.52%
  1. W=41.5×9.64=400.06

Panel wattage at STC 400.06 W

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How do I find a solar panel's wattage?

Multiply Vmp by Imp from the label. A panel with Vmp 41.5 V and Imp 9.64 A is rated about 400 W (400.06 W).

How much energy does a 400 W panel make per day?

With 4.5 peak sun hours and 14% losses, about 1.55 kWh a day, or roughly 565 kWh a year.

Why is Vmp lower than the open-circuit voltage?

Voc is measured with no load and no current. Power peaks at a lower voltage, Vmp, where voltage times current is highest.

Questions answered

Related calculators