Skip to content
FiftyCalc Free calculators for all 50 states

Timecode to Frames Calculator

Test cases replayed : 4 of 4 match · Methodology · No outside source listed

Enter a timecode and the frame rate to get the frame number it labels and the real running time it represents.

Result

Sample figures

Total frames—

Frames counted per timecode second —

  • Frame numbers dropped per minute—
  • Total minutes in the timecode—
  • Real running time (seconds)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Timecode to Frames Calculator

Hours: enter 0 or more. Prefilled example: 1.

Minutes: enter a number from 0 to 59. Prefilled example: 0.

Seconds: enter a number from 0 to 59. Prefilled example: 0.

Frames: enter 0 or more. Prefilled example: 0.

Frame rate: choose one of the 8 options in the list. Prefilled example: 24 fps.

Affiliate link

This is an affiliate link: FiftyCalc may earn a commission if you buy through it. This does not change the result.

Corel sells VideoStudio video editing software. Visit Corel VideoStudio

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Hours: enter 0 or more.
  2. Minutes: enter a number from 0 to 59.
  3. Seconds: enter a number from 0 to 59.
  4. Frames: enter 0 or more.
  5. Frame rate: choose one of the 8 options in the list.
  6. Read the result: Total frames; the panel also shows Frames counted per timecode second, Frame numbers dropped per minute, Total minutes in the timecode and Real running time (seconds).

How this calculator works

Non-drop timecode counts a whole number of frames per second: frames = (hours × 3600 + minutes × 60 + seconds) × frame rate + frames.

Drop-frame timecode (SMPTE ST 12-1) skips frame numbers 00 and 01 (00 to 03 at 59.94 fps) at the start of every minute except minutes 00, 10, 20, 30, 40 and 50, so the label stays close to clock time at 30000/1001 fps. Frames = non-drop count − drop × (total minutes − ⌊total minutes ÷ 10⌋).

Real time = frames ÷ actual rate, where 23.976, 29.97 and 59.94 mean 24, 30 and 60 × 1000/1001.

The formula

  1. Nom=round⁡(fps,0)
  2. D={2if fps=29.974if fps=59.940otherwise
  3. Tm=60×h+m
  4. Fr=(h×3,600+m×60+s)×Nom+f−D×(Tm−floor⁡(Tm10))
Symbols used in the formula
SymbolMeaning
hHours
mMinutes
sSeconds
fFrames
fpsFrame rate (23.976: 23.976 fps (non-drop, counted at 24); 24: 24 fps; 25: 25 fps (PAL); 29.97: 29.97 fps drop-frame; 30: 30 fps non-drop; 50: 50 fps; 59.94: 59.94 fps drop-frame; 60: 60 fps)
NomFrames counted per timecode second
DFrame numbers dropped per minute
TmTotal minutes in the timecode
FrTotal frames
round(x, d)x rounded to d decimal places, or to a whole number without d.
floor(x)the largest whole number not above x.

Worked example

Hours1
Minutes0
Seconds0
Frames0
Frame rate24 fps
Real running time (seconds)3,600
  1. Nom=round⁡(24,0)=24
  2. D=0
  3. Tm=60×1+0=60
  4. Fr=(1×3,600+0×60+0)×24+0−0×(60−floor⁡(6010))=86,400

Total frames 86,400

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

Why does 29.97 fps use drop-frame?

Counting 30 labels a second at a true rate of 29.97 drifts about 3.6 seconds an hour behind the clock; dropping frame numbers removes the drift.

How many frames is 01:00:00:00 at 29.97 drop-frame?

107,892 frames, about 3,599.9964 seconds of real time.

Related calculators