Upper Control Limit Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the process mean (center line), the process standard deviation, the subgroup size and the number of standard errors (3 for classic Shewhart limits) to get the upper and lower control limits.
Result
Upper control limit (UCL)
Lower control limit (LCL)
- Distance from the center line (k × σ ÷ √n)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Process mean (center line): enter a number.
- Process standard deviation (σ): enter 0 or more.
- Subgroup size (n; 1 for individual values): enter 1 or more.
- Sigma multiple (k): enter 0 or more.
- Read the result: Upper control limit (UCL); the panel also shows Lower control limit (LCL) and Distance from the center line (k × σ ÷ √n).
How this calculator works
Shewhart control limits for the mean of subgroups of size n: UCL = μ + k × σ ÷ √n and LCL = μ − k × σ ÷ √n, with center line μ. Shewhart's usual choice is k = 3 (NIST/SEMATECH e-Handbook of Statistical Methods, section 6.3.2).
With n = 1 the limits apply to individual values. When σ is unknown and is estimated from subgroup ranges or standard deviations, the handbook uses the tabulated constants A2 or A3 instead; enter your own σ estimate here.
The formula
| Symbol | Meaning |
|---|---|
| Process mean (center line) | |
| Process standard deviation | |
| Subgroup size (n; 1 for individual values) | |
| Sigma multiple | |
| Upper control limit (UCL) |
Worked example
| Process mean (center line) | 50 |
|---|---|
| Process standard deviation (σ) | 2 |
| Subgroup size (n; 1 for individual values) | 5 |
| Sigma multiple (k) | 3 |
| Lower control limit (LCL) | 47.3167 |
|---|---|
| Distance from the center line (k × σ ÷ √n) | 2.6833 |
Upper control limit (UCL) 52.6833
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What is the UCL for a mean of 50, σ = 2 and subgroups of 5?
50 + 3 × 2 ÷ √5 = 52.6833; the LCL is 47.3167.
Why are control limits set at 3 sigma?
For a normal process, a point falls outside μ ± 3 standard errors only about 0.27% of the time, so a point outside is a signal worth investigating.