Skip to content
FiftyCalc Free calculators for all 50 states

Vertical Jump Calculator

Test cases replayed : 2 of 2 match · Methodology · Sources

Two ways to measure a vertical jump: time how long you are in the air (from a video or a jump mat), or mark your standing reach and the highest point you touch. Enter either; each gives its own result.

Result

Sample figures

Jump height from hang time—in

Jump height from hang time (cm) —

  • Takeoff speed (m/s)—
  • Vertical jump from reach (inches)—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. Check important figures with the official source listed on this page.

Vertical Jump Calculator

Units: switches the fields between the two unit systems.

Hang time, takeoff to landing, in seconds: enter a number from 0 to 2. Prefilled example: 0.5.

Standing reach, in in: enter 0 or more. Prefilled example: 96.

Jump reach, highest point touched, in in: enter 0 or more. Prefilled example: 120.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Hang time, takeoff to landing, in seconds: enter a number from 0 to 2.
  3. Standing reach, in in: enter 0 or more.
  4. Jump reach, highest point touched, in in: enter 0 or more.
  5. Read the result: Jump height from hang time; the panel also shows Jump height from hang time (cm), Takeoff speed (m/s) and Vertical jump from reach (inches).

Sources

How this calculator works

Projectile motion: a body leaving the ground at speed v rises for v ÷ g and falls for the same time, so the hang time is t = 2v ÷ g. The height is h = v² ÷ 2g = g × t² ÷ 8, with g = 9.80665 m/s², standard gravity.

This holds only if you land in the same body position as you took off: bending the knees or tucking the legs on landing adds hang time and inflates the result.

Reach method: vertical jump = jump reach − standing reach. Standing reach is measured flat-footed with the arm stretched up; jump reach is the highest point touched with the same arm at the top of the jump.

The formula

  1. Hin=9.80665×t2÷80.0254
Symbols used in the formula
SymbolMeaningUnit
tHang time, takeoff to landingseconds
HinJump height from hang timein

Worked example

Hang time, takeoff to landing0.5 seconds
Standing reach96 in
Jump reach, highest point touched120 in
Jump height from hang time (cm)30.6
Takeoff speed (m/s)2.45
Vertical jump from reach (inches)24.0
  1. Hin=9.80665×0.52÷80.0254=12.0653

Jump height from hang time 12.1 in

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How high is a jump with half a second of hang time?

9.80665 × 0.5² ÷ 8 ≈ 0.306 m, about 12.1 inches.

What hang time do I need to dunk?

It depends on your reach: subtract your standing reach from the rim height plus the clearance you need, then solve t = √(8h ÷ g) with h in meters.

Why does my reach result differ from the hang time result?

The reach test also counts arm swing and shoulder lift at the top, and hang time is sensitive to landing posture; compare results from the same method only.

Questions answered

Related calculators