Skip to content
FiftyCalc Free calculators for all 50 states

Angle of Repose Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

The angle of repose is the steepest slope a loose material holds. Measure a poured pile, or enter a friction coefficient.

Result

Sample figures

Angle of repose—°

Equivalent friction coefficient (tan of the angle) —

  • Slope (rise per run, %)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Angle of Repose Calculator

You know: choose Height and base diameter of a pile or Coefficient of friction. Prefilled example: Height and base diameter of a pile.

Pile height: enter 0 or more. Prefilled example: 1.

Base diameter (same unit): enter 0 or more. Prefilled example: 3.2.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. You know: choose Height and base diameter of a pile or Coefficient of friction.
  2. Pile height: enter 0 or more.
  3. Base diameter (same unit): enter 0 or more.
  4. Coefficient of friction μ: enter 0 or more.
  5. Read the result: Angle of repose; the panel also shows Equivalent friction coefficient (tan of the angle) and Slope (rise per run, %).

How this calculator works

For a conical pile of height h and base diameter d, the angle of repose is θ = arctan(2h ÷ d), since the slope runs from the edge (radius d ÷ 2) to the top.

In the simple sliding model the material stays put while tan θ ≤ μ, so θ = arctan(μ). Real angles also depend on grain shape, moisture and how the pile was poured.

The formula

  1. Ang={deg⁡(atan⁡(2×hd))if m=1deg⁡(atan⁡(μ))otherwise
Symbols used in the formula
SymbolMeaningUnit
mYou know (1: Height and base diameter of a pile; 2: Coefficient of friction)
hPile height
dBase diametersame unit
μCoefficient of friction μ
AngAngle of repose°
deg(x)the angle x, converted from radians to degrees.

Worked example

You knowHeight and base diameter of a pile
Pile height1
Base diameter (same unit)3.2
Equivalent friction coefficient (tan of the angle)0.625
Slope (rise per run, %)62.5%
  1. Ang=deg⁡(atan⁡(2×13.2))=32.0054

Angle of repose 32.01 °

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the angle of repose of a 1 m pile with a 3.2 m base?

arctan(2 ÷ 3.2) ≈ 32.01°.

Why does damp sand hold steeper slopes?

Thin films of water bind the grains, adding cohesion that dry sand lacks.

Questions answered

Related calculators