Skip to content
FiftyCalc Free calculators for all 50 states

Ballistic Coefficient Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

The ballistic coefficient tells how well a projectile overcomes air drag. Use the shooters' form (sectional density ÷ form factor) or the physics form.

Result

Sample figures

Ballistic coefficient—

Sectional density (lb/in²) —

  • Unit of the result—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Ballistic Coefficient Calculator

Method: choose Bullet: weight, diameter and form factor or Physics: mass, drag coefficient and diameter. Prefilled example: Bullet: weight, diameter and form factor.

Bullet weight, in grains: enter 0 or more. Prefilled example: 168.

Bullet diameter, in in: enter 0 or more. Prefilled example: 0.308.

Form factor i (relative to the reference projectile): enter 0.01 or more. Prefilled example: 0.95.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Method: choose Bullet: weight, diameter and form factor or Physics: mass, drag coefficient and diameter.
  2. Bullet weight, in grains: enter 0 or more.
  3. Bullet diameter, in in: enter 0 or more.
  4. Form factor i (relative to the reference projectile): enter 0.01 or more.
  5. Mass, in kg: enter 0 or more.
  6. Drag coefficient Cd: enter 0.001 or more.
  7. Diameter, in mm: enter 0 or more.
  8. Read the result: Ballistic coefficient; the panel also shows Sectional density (lb/in²) and Unit of the result.

How this calculator works

Small-arms form: sectional density SD = w ÷ (7,000 × d²), with w the bullet weight in grains (7,000 grains = 1 lb) and d the diameter in inches; BC = SD ÷ i, where i is the form factor relative to the reference projectile of the drag model (G1 for most published figures).

Physics form: BC = m ÷ (Cd × A), with m the mass, Cd the drag coefficient and A = π × d² ÷ 4 the frontal area. A higher BC means the projectile loses speed more slowly. The two forms use different units and cannot be compared directly.

The formula

  1. Sd=gr÷7,000cal2
  2. Bc={Sdiif m=1m2cd×π×(dm÷1,000)2÷4otherwise
Symbols used in the formula
SymbolMeaningUnit
mMethod (1: Bullet: weight, diameter and form factor; 2: Physics: mass, drag coefficient and diameter)
grBullet weightgrains
calBullet diameterin
iForm factor i (relative to the reference projectile)
m2Masskg
cdDrag coefficient Cd
dmDiametermm
SdSectional densitylb/in²
BcBallistic coefficient

Worked example

MethodBullet: weight, diameter and form factor
Bullet weight168 grains
Bullet diameter0.308 in
Form factor i (relative to the reference projectile)0.95
Sectional density (lb/in²)0.253
Unit of the resultlb/in² (G1-style BC, as printed on ammunition boxes)
  1. Sd=168÷7,0000.3082=0.252994
  2. Bc=0.2529940.95=0.266309

Ballistic coefficient 0.2663

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the sectional density of a 168-grain .308 bullet?

168 ÷ 7,000 ÷ 0.308² ≈ 0.253 lb/in².

Why does the ballistic coefficient change with speed?

The drag of a real bullet does not follow the reference model exactly at every speed, so makers often give several BCs by velocity band.

Questions answered

Related calculators