Beam Deflection Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Choose the load case, enter the span, load, modulus of elasticity and moment of inertia to get the midspan deflection.
Result
Maximum deflection at midspanin
Span ÷ deflection (L/Δ)
- Maximum deflection (millimeters)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Load case: choose Uniform load over the full span or Point load at midspan.
- Span between supports, in ft: enter 0 or more.
- Load: pounds per foot (uniform) or pounds (point): enter 0 or more.
- Modulus of elasticity E, in psi: enter 1 or more.
- Moment of inertia I (in⁴): enter 0.001 or more.
- Read the result: Maximum deflection at midspan; the panel also shows Span ÷ deflection (L/Δ) and Maximum deflection (millimeters).
How this calculator works
Simply supported beam, uniform load w: Δ = 5wL⁴ ÷ (384EI). Point load P at midspan: Δ = PL³ ÷ (48EI). These are the standard Euler-Bernoulli results tabulated in the AISC Steel Construction Manual and the AWC beam formulas.
Units: L in inches (feet × 12), w in pounds per inch (pounds per foot ÷ 12), E in psi and I in in⁴. The defaults are a 2×10 (1.5 × 9.25 in, I = 98.93 in⁴) with E = 1,600,000 psi. Self-weight is not added.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Load case (1: Uniform load over the full span; 2: Point load at midspan) | ||
| Span between supports | ft | |
| Load: pounds per foot (uniform) or pounds (point) | ||
| Modulus of elasticity E | psi | |
| Moment of inertia I (in⁴) | ||
| Maximum deflection at midspan | in |
Worked example
| Load case | Uniform load over the full span |
|---|---|
| Span between supports | 12 ft |
| Load: pounds per foot (uniform) or pounds (point) | 100 |
| Modulus of elasticity E | 1,600,000 psi |
| Moment of inertia I (in⁴) | 98.93 |
| Span ÷ deflection (L/Δ) | 489 |
|---|---|
| Maximum deflection (millimeters) | 7.49 |
Maximum deflection at midspan 0.2948 in
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What does L/360 mean?
A deflection limit: the span divided by 360. Building codes use limits like L/360 for floors under live load.
Why does span matter so much?
Under a uniform load, deflection grows with the fourth power of the span: doubling the span multiplies it by 16.