Skip to content
FiftyCalc Free calculators for all 50 states

Beer-Lambert Law Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the absorbance, the molar absorptivity and the path length to get the concentration.

Result

Sample figures

Concentration (µmol/L)—

Concentration (mmol/L) —

  • Transmittance (%T)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Beer-Lambert Law Calculator

Absorbance A (no unit): enter 0 or more. Prefilled example: 0.5.

Molar absorptivity ε (L/(mol·cm)): enter 0 or more. Prefilled example: 6,220.

Path length l, in cm: enter 0 or more. Prefilled example: 1.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Absorbance A (no unit): enter 0 or more.
  2. Molar absorptivity ε (L/(mol·cm)): enter 0 or more.
  3. Path length l, in cm: enter 0 or more.
  4. Read the result: Concentration (µmol/L); the panel also shows Concentration (mmol/L) and Transmittance (%T).

How this calculator works

Beer-Lambert law: A = ε × l × c, so c = A ÷ (ε × l), in mol/L when ε is in L/(mol·cm) and l in cm. Transmittance %T = 10^(−A) × 100.

The default ε = 6,220 L/(mol·cm) is the value used for NADH at 340 nm in the University of Pennsylvania NADH-linked ATPase assay protocol (med.upenn.edu, read 2026-10-27); enter the value for your own compound and wavelength.

The formula

  1. C=abeps×l×1,000,000
Symbols used in the formula
SymbolMeaningUnit
abAbsorbance A (no unit)
epsMolar absorptivity ε (L/(mol·cm))
lPath length lcm
CConcentrationµmol/L

Worked example

Absorbance A (no unit)0.5
Molar absorptivity ε (L/(mol·cm))6,220
Path length l1 cm
Concentration (mmol/L)0.0804
Transmittance (%T)31.62%
  1. C=0.56,220×1×1,000,000=80.3859

Concentration (µmol/L) 80.3859

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What absorbance range is reliable?

Many instruments are most linear between about 0.1 and 1; above that, dilute the sample and multiply back by the dilution factor.

Is absorbance the same as optical density?

In everyday lab use, yes: both are −log₁₀ of the transmitted fraction.

Related calculators