Skip to content
FiftyCalc Free calculators for all 50 states

Bending Stress Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Enter the bending moment and choose the cross-section to get the maximum bending stress in psi and MPa.

Result

Sample figures

Maximum bending stress—psi

Section modulus used (in³) —

  • Maximum bending stress (MPa)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Bending Stress Calculator

Bending moment (pound-feet): enter 0 or more. Prefilled example: 3,600.

Cross-section

Cross-section: choose Rectangle (b × h), Solid round (diameter) or Known section modulus S. Prefilled example: Rectangle (b × h).

Width b, rectangle, in in: enter 0 or more. Prefilled example: 1.5.

Depth h, rectangle, in in: enter 0 or more. Prefilled example: 9.25.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Bending moment (pound-feet): enter 0 or more.
  2. Cross-section: choose Rectangle (b × h), Solid round (diameter) or Known section modulus S.
  3. Width b, rectangle, in in: enter 0 or more.
  4. Depth h, rectangle, in in: enter 0 or more.
  5. Diameter, solid round, in in: enter 0 or more.
  6. Section modulus S (in³), known section: enter 0.001 or more.
  7. Read the result: Maximum bending stress; the panel also shows Section modulus used (in³) and Maximum bending stress (MPa).

How this calculator works

Flexure formula: σ = M × c ÷ I = M ÷ S, where c is the distance from the neutral axis to the outer fiber, I the moment of inertia and S = I ÷ c the section modulus.

Rectangle: S = b × h² ÷ 6. Solid round: S = π × d³ ÷ 32. The moment is converted to pound-inches (× 12); 1 psi = 0.00689475729 MPa.

The formula

  1. S3={b×h26if s=1π×d332if s=2s2otherwise
  2. Psi=M×12S3
Symbols used in the formula
SymbolMeaningUnit
MBending moment (pound-feet)
sCross-section (1: Rectangle (b × h); 2: Solid round (diameter); 3: Known section modulus S)
bWidth b, rectanglein
hDepth h, rectanglein
dDiameter, solid roundin
s2Section modulus S (in³), known section
S3Section modulus usedin³
PsiMaximum bending stresspsi

Worked example

Bending moment (pound-feet)3,600
Cross-sectionRectangle (b × h)
Width b, rectangle1.5 in
Depth h, rectangle9.25 in
Section modulus used (in³)21.3906
Maximum bending stress (MPa)13.92
  1. S3=1.5×9.2526=21.3906
  2. Psi=3,600×1221.3906=2,019.58

Maximum bending stress 2,020 psi

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the bending stress in a 2×10 under 3,600 lb-ft?

S = 1.5 × 9.25² ÷ 6 = 21.39 in³, so σ = 43,200 ÷ 21.39 = 2,020 psi.

Where is bending stress highest?

At the top and bottom fibers, farthest from the neutral axis, where the moment is largest.

Questions answered

Related calculators