Brinell Hardness Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
The Brinell number is the test force divided by the curved area of the dent a hard ball leaves. Enter the load, the ball and the measured indentation.
Result
Brinell hardness (HBW)
Indentation depth (mm)
- Force-diameter ratio F ÷ D² (kgf/mm²)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Test force (kgf): enter 0 or more.
- Ball diameter, D, in mm: enter 0.1 or more.
- Mean indentation diameter, d, in mm: enter 0 or more.
- Read the result: Brinell hardness (HBW); the panel also shows Indentation depth (mm) and Force-diameter ratio F ÷ D² (kgf/mm²).
How this calculator works
HBW = 2F ÷ [π D (D − √(D² − d²))], with F the test force in kilograms-force, D the ball diameter and d the mean diameter of the indentation, both in millimeters. This is the definition in ASTM E10 and ISO 6506-1 (the force there is written 0.102 × F in newtons, which is the same as F in kgf).
The depth of the spherical cap is h = (D − √(D² − d²)) ÷ 2. The standards also set which force-diameter ratio F ÷ D² and which range of d make a valid test for each material.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Test force (kgf) | ||
| Ball diameter, D | mm | |
| Mean indentation diameter, d | mm | |
| Brinell hardness (HBW) |
Worked example
| Test force (kgf) | 3,000 |
|---|---|
| Ball diameter, D | 10 mm |
| Mean indentation diameter, d | 4 mm |
| Indentation depth (mm) | 0.4174 |
|---|---|
| Force-diameter ratio F ÷ D² (kgf/mm²) | 30 |
Brinell hardness (HBW) 228.8
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What does HBW mean?
Brinell hardness measured with a tungsten carbide ball (the W). Older results with a steel ball were written HBS.
What Brinell number gives a 4 mm dent?
With 3,000 kgf on a 10 mm ball, a 4 mm indentation gives about 228.8 HBW.