Calibration Curve Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the slope and intercept of your standard curve and the signal of the unknown.
Result
Concentration in the measured solution
Concentration in the original sample
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Slope m (signal per concentration unit): enter a number.
- Intercept b (signal): enter a number.
- Measured signal of the unknown: enter a number.
- Dilution factor of the sample (1 if undiluted): enter 0 or more.
- Read the result: Concentration in the measured solution; the panel also shows Concentration in the original sample.
How this calculator works
A linear calibration curve fits standards as y = m × x + b (least squares). For an unknown, x = (y − b) ÷ m, in the concentration unit of the standards.
If the sample was diluted before measurement, multiply by the dilution factor. To get m and b from your standards, use a linear regression calculator.
The formula
| Symbol | Meaning |
|---|---|
| Slope m (signal per concentration unit) | |
| Intercept b (signal) | |
| Measured signal of the unknown | |
| Concentration in the measured solution |
Worked example
| Slope m (signal per concentration unit) | 0.0452 |
|---|---|
| Intercept b (signal) | 0.0031 |
| Measured signal of the unknown | 0.512 |
| Dilution factor of the sample (1 if undiluted) | 1 |
| Concentration in the original sample | 11.2588 |
|---|
Concentration in the measured solution 11.2588
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
Can I extrapolate beyond the standards?
It is not good practice: the curve is only known between the lowest and highest standards.
What if my intercept is negative?
Enter it with its sign; the formula handles it.