Skip to content
FiftyCalc Free calculators for all 50 states

Chemical Oxygen Demand Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the ferrous ammonium sulfate (FAS) volumes for the blank and the sample, its normality and the sample volume.

Result

Sample figures

Chemical oxygen demand (mg/L O₂)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Chemical Oxygen Demand Calculator

FAS for the blank, A, in mL: enter 0 or more. Prefilled example: 24.5.

FAS for the sample, B, in mL: enter 0 or more. Prefilled example: 18.3.

FAS normality C (N): enter 0 or more. Prefilled example: 0.25.

Sample volume, in mL: enter 0 or more. Prefilled example: 50.

Chloride correction D from your curve (0 if none), in mg/L: enter 0 or more. Prefilled example: 0.

Sample type: choose Fresh water (no saline factor) or Saline water, EPA 410.3 factor 1.2. Prefilled example: Fresh water (no saline factor).

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. FAS for the blank, A, in mL: enter 0 or more.
  2. FAS for the sample, B, in mL: enter 0 or more.
  3. FAS normality C (N): enter 0 or more.
  4. Sample volume, in mL: enter 0 or more.
  5. Chloride correction D from your curve (0 if none), in mg/L: enter 0 or more.
  6. Sample type: choose Fresh water (no saline factor) or Saline water, EPA 410.3 factor 1.2.
  7. Read the result: Chemical oxygen demand (mg/L O₂).

How this calculator works

COD (mg/L) = [(A − B) × C × 8,000 − 50 × D] ÷ mL of sample × 1.2, as written in EPA Method 410.3 (titrimetric, high level for saline waters), section 8.0 (epa.gov method_410-3_1978.pdf, read 2026-10-27). A and B are mL of ferrous ammonium sulfate for the blank and the sample, C its normality, D the chloride correction.

For fresh water with no chloride correction, set D = 0 and leave out the 1.2 factor: COD = (A − B) × C × 8,000 ÷ mL of sample. The 8,000 is the equivalent weight of oxygen (8 g) × 1,000 mg/g.

The formula

  1. Cod=(a−b)×n×8,000−50×ds×f
Symbols used in the formula
SymbolMeaningUnit
aFAS for the blank, AmL
bFAS for the sample, BmL
nFAS normality C (N)
sSample volumemL
dChloride correction D from your curve (0 if none)mg/L
fSample type
CodChemical oxygen demand (mg/L O₂)

Worked example

FAS for the blank, A24.5 mL
FAS for the sample, B18.3 mL
FAS normality C (N)0.25
Sample volume50 mL
Chloride correction D from your curve (0 if none)0 mg/L
Sample typeFresh water (no saline factor)
  1. Cod=(24.5−18.3)×0.25×8,000−50×050×1=248

Chemical oxygen demand (mg/L O₂) 248.0

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

Why is the blank titration larger?

Organic matter in the sample uses up dichromate, so less is left to titrate; the difference measures the oxygen demand.

Is COD the same as BOD?

No. COD oxidizes nearly all organic matter chemically in a few hours; BOD measures what microbes consume over five days.

Related calculators