Skip to content
FiftyCalc Free calculators for all 50 states

Crawl Ratio Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

The crawl ratio is the total gear reduction in first gear and low range, how many engine turns it takes to turn the wheels once. Enter the three ratios.

Result

Sample figures

Crawl ratio (to 1)—

Wheel speed at that engine speed (RPM) —

  • Ground speed (mph)—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Crawl Ratio Calculator

Units: switches the fields between the two unit systems.

First gear ratio: enter 0 or more. Prefilled example: 4.71.

Transfer case low range ratio: enter 1 or more. Prefilled example: 2.72.

Axle (differential) ratio: enter 0 or more. Prefilled example: 4.1.

Engine speed, in RPM: enter 0 or more. Prefilled example: 1,000.

Tire diameter, in in: enter 1 or more. Prefilled example: 33.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. First gear ratio: enter 0 or more.
  3. Transfer case low range ratio: enter 1 or more.
  4. Axle (differential) ratio: enter 0 or more.
  5. Engine speed, in RPM: enter 0 or more.
  6. Tire diameter, in in: enter 1 or more.
  7. Read the result: Crawl ratio (to 1); the panel also shows Wheel speed at that engine speed (RPM) and Ground speed (mph).

How this calculator works

Crawl ratio = first-gear ratio × transfer case low ratio × axle ratio. For an automatic, use first gear; a torque converter adds slip that the formula ignores.

Wheel RPM = engine RPM ÷ crawl ratio, and speed (mph) = wheel RPM × π × tire diameter (in) × 60 ÷ 63,360 inches per mile.

The formula

  1. Cr=g1×tc×ax
Symbols used in the formula
SymbolMeaning
g1First gear ratio
tcTransfer case low range ratio
axAxle (differential) ratio
CrCrawl ratio (to 1)

Worked example

First gear ratio4.71
Transfer case low range ratio2.72
Axle (differential) ratio4.1
Engine speed1,000 RPM
Tire diameter33 in
Wheel speed at that engine speed (RPM)19.0382
Ground speed (mph)1.8691
  1. Cr=4.71×2.72×4.1=52.5259

Crawl ratio (to 1) 52.5

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What crawl ratio is good for rock crawling?

There is no single number: the higher the ratio, the slower and more controlled the wheels turn at idle, at the cost of more shifting.

Do bigger tires change the crawl ratio?

Not the ratio itself, but they raise the ground speed for the same engine RPM, which acts like a taller gear.

Questions answered

Related calculators