Skip to content
FiftyCalc Free calculators for all 50 states

Diametral Pitch Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Diametral pitch is the number of teeth per inch of pitch diameter. Measure the outside diameter and count the teeth of a standard full-depth gear.

Result

Sample figures

Diametral pitch (teeth per inch)—

Pitch diameter (inches) —

  • Circular pitch (inches)—
  • Addendum (inches)—
  • Equivalent module (mm)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Diametral Pitch Calculator

Number of teeth: enter 1 or more. Prefilled example: 24.

Outside diameter, in in: enter 0.01 or more. Prefilled example: 2.6.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Number of teeth: enter 1 or more.
  2. Outside diameter, in in: enter 0.01 or more.
  3. Read the result: Diametral pitch (teeth per inch); the panel also shows Pitch diameter (inches), Circular pitch (inches), Addendum (inches) and Equivalent module (mm).

How this calculator works

For a standard full-depth involute spur gear, the addendum is 1 ÷ P, so the outside diameter is (N + 2) ÷ P. Hence P = (N + 2) ÷ OD, the pitch diameter D = N ÷ P and the circular pitch p = π ÷ P.

The metric module is m = 25.4 ÷ P, from 1 in = 25.4 mm exactly (NIST SP 811, Appendix B (nist.gov/pml/special-publication-811, read 2026-10-27)). Meshing gears must share the same diametral pitch and pressure angle.

The formula

  1. Dp=n+2od
Symbols used in the formula
SymbolMeaningUnit
nNumber of teeth
odOutside diameterin
DpDiametral pitch (teeth per inch)

Worked example

Number of teeth24
Outside diameter2.6 in
Pitch diameter (inches)2.4
Circular pitch (inches)0.3142
Addendum (inches)0.1
Equivalent module (mm)2.54
  1. Dp=24+22.6=10

Diametral pitch (teeth per inch) 10

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What pitch is a 24-tooth gear 2.6 in across?

(24 + 2) ÷ 2.6 = 10 diametral pitch, with a 2.4 in pitch diameter.

Is a higher diametral pitch a bigger tooth?

No, smaller: more teeth per inch of diameter means finer teeth.

Questions answered

Related calculators