Skip to content
FiftyCalc Free calculators for all 50 states

Factor of Safety Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the stress or load that would cause failure and the stress or load the part actually carries, in the same unit.

Result

Sample figures

Factor of safety—

Margin of safety —

  • Share of capacity used (%)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Factor of Safety Calculator

Failure strength or load (yield or ultimate): enter 0 or more. Prefilled example: 36,000.

Working stress or load (same unit): enter 0 or more. Prefilled example: 18,000.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Failure strength or load (yield or ultimate): enter 0 or more.
  2. Working stress or load (same unit): enter 0 or more.
  3. Read the result: Factor of safety; the panel also shows Margin of safety and Share of capacity used (%).

How this calculator works

Factor of safety FoS = failure strength ÷ working stress (or failure load ÷ working load). The margin of safety is FoS − 1. A value of 1 means the part is exactly at failure.

State which strength you use: yield strength for parts that must not deform permanently, ultimate strength for fracture. The required factor is set by the design code that applies to the structure.

The formula

  1. Fos=fw
Symbols used in the formula
SymbolMeaningUnit
fFailure strength or load (yield or ultimate)
wWorking stress or loadsame unit
FosFactor of safety

Worked example

Failure strength or load (yield or ultimate)36,000
Working stress or load (same unit)18,000
Margin of safety1.00
Share of capacity used (%)50%
  1. Fos=36,00018,000=2

Factor of safety 2.00

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

A part with 36,000 psi yield strength carries 18,000 psi. What is the factor of safety?

2.00, a margin of safety of 1.00; the part uses 50% of its capacity.

Is a factor of safety below 1 acceptable?

No. Below 1 the working stress exceeds the failure strength, so the part is expected to fail.

Questions answered

Related calculators