Skip to content
FiftyCalc Free calculators for all 50 states

Free Fall with Air Resistance Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the mass, drag coefficient and frontal area of the object, the air density and the time it has been falling from rest.

Result

Sample figures

Terminal velocity—m/s

g t ÷ vt (unitless) —

  • Speed after that time (m/s)—
  • Speed after that time (mph)—
  • Distance fallen (m)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Free Fall with Air Resistance Calculator

Mass, in kg: enter 0 or more. Prefilled example: 80.

Drag coefficient Cd: enter 0 or more. Prefilled example: 1.0.

Frontal area, in m²: enter 0 or more. Prefilled example: 0.7.

Air density (kg/m³, example; use our air density calculator for your conditions): enter 0 or more. Prefilled example: 1.2.

Time falling from rest, in seconds: enter 0 or more. Prefilled example: 10.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Mass, in kg: enter 0 or more.
  2. Drag coefficient Cd: enter 0 or more.
  3. Frontal area, in m²: enter 0 or more.
  4. Air density (kg/m³, example; use our air density calculator for your conditions): enter 0 or more.
  5. Time falling from rest, in seconds: enter 0 or more.
  6. Read the result: Terminal velocity; the panel also shows g t ÷ vt (unitless), Speed after that time (m/s), Speed after that time (mph) and Distance fallen (m).

How this calculator works

Quadratic drag F = ½ ρ Cd A v². Terminal velocity v_t = √(2mg ÷ (ρ Cd A)). Falling from rest, v(t) = v_t tanh(g t ÷ v_t) and the distance is y(t) = (v_t² ÷ g) ln cosh(g t ÷ v_t).

g = 9.80665 m/s², the standard acceleration of gravity (NIST CODATA 2022 values (https://physics.nist.gov/cuu/Constants/Table/allascii.txt, read 2026-10-27)); 1 mph = 0.44704 m/s (NIST Special Publication 811, Appendix B.9 (https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9, read 2026-10-27)). The air density is held constant, which is a good approximation for falls of a few kilometers or less.

The formula

  1. Vt=2×m×9.80665ρ×cd×A
Symbols used in the formula
SymbolMeaningUnit
mMasskg
cdDrag coefficient Cd
AFrontal aream²
ρAir density (example, use our air density calculator for your conditions)kg/m³
VtTerminal velocitym/s

Worked example

Mass80 kg
Drag coefficient Cd1
Frontal area0.7 m²
Air density (kg/m³, example; use our air density calculator for your conditions)1.2
Time falling from rest10 seconds
g t ÷ vt (unitless)2.269
Speed after that time (m/s)42.30
Speed after that time (mph)94.6
Distance fallen (m)302.2
  1. Vt=2×80×9.806651.2×1×0.7=43.2196

Terminal velocity 43.22 m/s

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What terminal velocity do 80 kg, Cd 1.0 and 0.7 m² give in air of 1.2 kg/m³?

About 43.22 m/s; after 10 s the speed is about 42.30 m/s (94.6 mph) and the fall about 302.2 m.

Why does the speed stop rising?

Drag grows with the square of speed until it equals the weight; then the net force is zero and the speed stays at the terminal velocity.

Questions answered

Related calculators