Skip to content
FiftyCalc Free calculators for all 50 states

Gear Ratio Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the number of teeth on the driving (input) gear and the driven (output) gear, then the input speed and torque.

Result

Sample figures

Gear ratio (driven ÷ driving)—

Output speed (RPM) —

  • Output torque, no losses (same unit)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Gear Ratio Calculator

Driving gear teeth: enter 1 or more. Prefilled example: 12.

Driven gear teeth: enter 1 or more. Prefilled example: 36.

Input speed, in RPM: enter 0 or more. Prefilled example: 1,800.

Input torque (lb·ft or N·m): enter 0 or more. Prefilled example: 10.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Driving gear teeth: enter 1 or more.
  2. Driven gear teeth: enter 1 or more.
  3. Input speed, in RPM: enter 0 or more.
  4. Input torque (lb·ft or N·m): enter 0 or more.
  5. Read the result: Gear ratio (driven ÷ driving); the panel also shows Output speed (RPM) and Output torque, no losses (same unit).

How this calculator works

Gear ratio = driven teeth ÷ driving teeth. Output speed = input speed ÷ ratio and, with no friction losses, output torque = input torque × ratio, so power is unchanged.

A ratio above 1 is a reduction (slower, more torque); below 1 an overdrive. Real gear trains lose a few percent of power to friction.

The formula

  1. R=t2t1
Symbols used in the formula
SymbolMeaning
t1Driving gear teeth
t2Driven gear teeth
RGear ratio (driven ÷ driving)

Worked example

Driving gear teeth12
Driven gear teeth36
Input speed1,800 RPM
Input torque (lb·ft or N·m)10
Output speed (RPM)600
Output torque, no losses (same unit)30
  1. R=3612=3

Gear ratio (driven ÷ driving) 3

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the ratio of a 12-tooth gear driving a 36-tooth gear?

3 (3:1): 1,800 RPM in gives 600 RPM out and three times the torque.

Does the direction change?

Yes. Two external gears turn in opposite directions; an idler gear between them restores the direction without changing the ratio.

Questions answered

Related calculators