Skip to content
FiftyCalc Free calculators for all 50 states

Gear Ratio Speed Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the engine speed, the transmission gear ratio, the final drive (axle) ratio and the tire diameter.

Result

Sample figures

Vehicle speed—mph

Wheel speed (RPM) —

  • Vehicle speed (km/h)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Gear Ratio Speed Calculator

Engine speed, in RPM: enter 0 or more. Prefilled example: 3,000.

Transmission gear ratio (e.g. 1.00 in direct drive): enter 0 or more. Prefilled example: 1.

Axle (final drive) ratio: enter 0 or more. Prefilled example: 3.73.

Tire diameter, in in: enter 0 or more. Prefilled example: 28.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Engine speed, in RPM: enter 0 or more.
  2. Transmission gear ratio (e.g. 1.00 in direct drive): enter 0 or more.
  3. Axle (final drive) ratio: enter 0 or more.
  4. Tire diameter, in in: enter 0 or more.
  5. Read the result: Vehicle speed; the panel also shows Wheel speed (RPM) and Vehicle speed (km/h).

How this calculator works

Wheel RPM = engine RPM ÷ (gear ratio × axle ratio). Speed (mph) = wheel RPM × π × tire diameter (in) × 60 ÷ 63,360, since one mile is 63,360 inches. This is the same as the shop formula mph = RPM × diameter ÷ (gear × axle × 336.13).

1 mile = 63,360 in = 1.609344 km (NIST Special Publication 811, Appendix B.9 (https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9, read 2026-10-27)). Real tires run a little smaller than their nominal diameter under load.

The formula

  1. Wr=rpmg×ax
  2. Mph=Wr×π×d×6063,360
Symbols used in the formula
SymbolMeaningUnit
rpmEngine speedRPM
gTransmission gear ratio (e.g. 1.00 in direct drive)
axAxle (final drive) ratio
dTire diameterin
WrWheel speedRPM
MphVehicle speedmph

Worked example

Engine speed3,000 RPM
Transmission gear ratio (e.g. 1.00 in direct drive)1
Axle (final drive) ratio3.73
Tire diameter28 in
Wheel speed (RPM)804.2895
Vehicle speed (km/h)107.8
  1. Wr=3,0001×3.73=804.29
  2. Mph=804.29×3.14159×28×6063,360=66.9972

Vehicle speed 67.0 mph

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How fast is a car at 3,000 RPM in a 1:1 gear with 3.73 gears and 28-inch tires?

About 67.0 mph (107.8 km/h).

What does a taller tire do?

It raises the speed at the same RPM in proportion to the diameter: 10% taller tires give 10% more speed.

Questions answered

Related calculators