Skip to content
FiftyCalc Free calculators for all 50 states

Heat of Combustion Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the calorimeter's heat capacity, the temperature rise, the sample mass and its molar mass.

Result

Sample figures

Heat of combustion (kJ/g)—

Heat released q (kJ) —

  • Heat of combustion (kJ/mol; ΔH is minus this)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Heat of Combustion Calculator

Calorimeter heat capacity (kJ/°C): enter 0 or more. Prefilled example: 10.0.

Temperature rise ΔT, in °C: enter 0 or more. Prefilled example: 2.5.

Sample mass burned, in g: enter 0 or more. Prefilled example: 1.0.

Molar mass of the sample, in g/mol: enter 0 or more. Prefilled example: 122.123.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Calorimeter heat capacity (kJ/°C): enter 0 or more.
  2. Temperature rise ΔT, in °C: enter 0 or more.
  3. Sample mass burned, in g: enter 0 or more.
  4. Molar mass of the sample, in g/mol: enter 0 or more.
  5. Read the result: Heat of combustion (kJ/g); the panel also shows Heat released q (kJ) and Heat of combustion (kJ/mol; ΔH is minus this).

How this calculator works

q = C_cal × ΔT, where C_cal is the calorimeter constant found by burning a standard. Heat per gram = q ÷ mass; per mole = q ÷ mass × molar mass. The enthalpy of combustion is the negative of these, since heat is released.

The default molar mass is benzoic acid, C₇H₆O₂: 122.123 g/mol (CIAAW abridged standard atomic weights 2024 (ciaaw.org/abridged-atomic-weights.htm, read 2026-10-27)). The other defaults are an example run.

The formula

  1. Qg=c×dtm
Symbols used in the formula
SymbolMeaningUnit
cCalorimeter heat capacitykJ/°C
dtTemperature rise ΔT°C
mSample mass burnedg
QgHeat of combustionkJ/g

Worked example

Calorimeter heat capacity (kJ/°C)10
Temperature rise ΔT2.5 °C
Sample mass burned1 g
Molar mass of the sample122.123 g/mol
Heat released q (kJ)25
Heat of combustion (kJ/mol; ΔH is minus this)3053.1
  1. Qg=10×2.51=25

Heat of combustion (kJ/g) 25

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

Why is the enthalpy of combustion negative?

Burning releases heat, so the system loses enthalpy: ΔH < 0.

What is the calorimeter constant?

The heat needed to warm the whole calorimeter by 1 °C, found by burning a sample of known heat of combustion.

Related calculators