Skip to content
FiftyCalc Free calculators for all 50 states

How Do You Calculate Cubic Feet?

To calculate the cubic feet of a rectangular space, multiply its length, width and height, each measured in feet. With a length of 6 feet, a width of 4 feet and a height of 3 feet, the volume is 6 × 4 × 3 = 72 cubic feet, which the calculator shows. In the general tables of units of measurement of the National Institute of Standards and Technology (NIST), a cubic foot is 1,728 cubic inches, which is 12 × 12 × 12.

Open the Cubic Feet Calculator

How it is calculated

Measure the length, width and height of the rectangular space in the same unit, then choose that unit in the calculator: inches, feet, yards, centimeters or meters. The calculator turns each side into feet before multiplying, so the result is always in cubic feet. Measured in inches, a cube with sides of 12 inches is 12 × 12 × 12 = 1,728 cubic inches, which the calculator shows as 1 cubic foot.

NIST's tables give 27 cubic feet as 1 cubic yard, so the calculator divides cubic feet by 27 to show cubic yards. For U.S. gallons, it multiplies cubic feet by 1,728 and divides by 231, since NIST gives 1 gallon as 231 cubic inches. So the calculator shows 7.4805 gallons for 1 cubic foot, rounded. It also shows the volume in cubic meters.

Worked example

Assumptions: a rectangular room 10 feet long, 10 feet wide and 8 feet high. The calculator multiplies 10 × 10 × 8 and shows 800 cubic feet, or 29.6296 cubic yards, rounded.

Length10
Width10
Height8
Unit of the dimensionsFeet
Volume800 cu ft
Volume (cubic yards)29.6296
Volume (cubic meters)22.6535
Volume (US gallons)5,984.4156

Figures computed by this site's calculator from the inputs above. Run your own numbers: Cubic Feet Calculator

Frequently asked questions

How many cubic feet are in a cubic yard?

NIST's tables give 1 cubic yard as 27 cubic feet, and a cube with sides of 1 yard shows 27 cubic feet in the calculator.

How many cubic inches are in a cubic foot?

A cubic foot is 12 × 12 × 12 = 1,728 cubic inches, the figure in NIST's table of units of volume.

Sources

General information drawn from the official sources above, not tax or legal advice. Amounts change from year to year: check the source for your tax year.

Related

See all Construction & Materials Calculators