How Do You Calculate Roof Pitch?
To calculate roof pitch, measure how many inches the roof rises over a horizontal run, divide the rise by the run and multiply by 12. The result is the pitch in inches of rise per 12 inches of run: a roof that rises 6 inches over 12 inches of run has a 6 in 12 pitch, which the calculator shows as 6.00. The Occupational Safety and Health Administration (OSHA) writes roof slope the same way, vertical to horizontal: in its construction rules, a low-slope roof is a roof having a slope less than or equal to 4 in 12.
By FiftyCalc · Updated November 17, 2026, first published November 17, 2026
Open the Roof Pitch Calculator
How it is calculated
Enter the rise and the run you measured, in inches; with a run of 12 inches, which NIST's tables give as 1 foot, the rise is the pitch. Over a longer run, the calculator scales the rise to 12 inches: a rise of 8 inches over 24 inches of run gives 8 ÷ 24 × 12 = 4, a 4 in 12 pitch.
The calculator also gives the roof angle in degrees, the arctangent of the rise divided by the run, and shows 26.57 degrees for a 6 in 12 roof. It shows the slope as a percent grade, the rise divided by the run times 100, which is 50% for a 6 in 12 roof. For a roof area with a uniform 6 in 12 pitch, the pitch multiplier, the square root of 1 plus the square of rise divided by run, is 1.118 and turns the horizontal projected area into the sloped roof area.
In the same OSHA definitions, from its construction rules on fall protection, a steep roof is a roof having a slope greater than 4 in 12 (vertical to horizontal). At the low-slope limit of 4 in 12, the calculator shows an angle of 18.43 degrees and a slope of 33.33%.
Worked example
Assumptions: a roof that rises 9 inches over 12 inches of horizontal run. The calculator shows a pitch of 9.00, an angle of 36.87 degrees, a slope of 75% and a pitch multiplier of 1.25. Under OSHA's definitions, a 9 in 12 roof is a steep roof, since its slope is greater than 4 in 12.
| Rise | 9 in |
|---|---|
| Run | 12 in |
| Pitch (inches of rise per 12 in of run) | 9.00 |
|---|---|
| Roof angle (degrees) | 36.87 |
| Slope (percent grade) | 75% |
| Pitch multiplier (roof area ÷ footprint) | 1.25 |
Figures computed by this site's calculator from the inputs above. Run your own numbers: Roof Pitch Calculator
Frequently asked questions
What angle is a 6/12 roof pitch?
A roof that rises 6 inches over 12 inches of run is at 26.57 degrees in the calculator, rounded.
What pitch is a low-slope roof?
OSHA defines a low-slope roof as a roof having a slope less than or equal to 4 in 12 (vertical to horizontal).
What angle is a 12/12 roof pitch?
A rise of 12 inches over 12 inches of run gives an angle of 45 degrees and a slope of 100% in the calculator.
Sources
- 29 CFR 1926.500, Scope, application, and definitions applicable to this subpart (Subpart M, Fall Protection) Occupational Safety and Health Administration (OSHA), U.S. Department of Labor checked on 2026-11-16
- NIST Handbook 44 (2026), Appendix C, General Tables of Units of Measurement National Institute of Standards and Technology (NIST) checked on 2026-11-13
General information drawn from the official sources above, not tax or legal advice. Amounts change from year to year: check the source for your tax year.