Skip to content
FiftyCalc Free calculators for all 50 states

Hoop Stress Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the internal pressure, the inside diameter and the wall thickness.

Result

Sample figures

Hoop stress—psi

Longitudinal stress (psi) —

  • Hoop stress (MPa)—
  • Diameter ÷ thickness—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Hoop Stress Calculator

Internal pressure, in psi: enter 0 or more. Prefilled example: 150.

Inside diameter, in in: enter 0 or more. Prefilled example: 12.

Wall thickness, in in: enter 0 or more. Prefilled example: 0.25.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Internal pressure, in psi: enter 0 or more.
  2. Inside diameter, in in: enter 0 or more.
  3. Wall thickness, in in: enter 0 or more.
  4. Read the result: Hoop stress; the panel also shows Longitudinal stress (psi), Hoop stress (MPa) and Diameter ÷ thickness.

How this calculator works

Thin-walled cylinder (Barlow's formula form): hoop stress σ_h = p D ÷ (2t) and longitudinal stress σ_l = p D ÷ (4t), with p the internal pressure, D the diameter and t the wall thickness. The hoop stress is twice the longitudinal stress.

1 psi = 6.894757 kPa (NIST Special Publication 811, Appendix B.9 (https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9, read 2026-10-27)). The thin-wall formula assumes a wall that is thin compared with the diameter; thick-walled vessels need the Lamé equations.

The formula

  1. Sh=p×D2×t
Symbols used in the formula
SymbolMeaningUnit
pInternal pressurepsi
DInside diameterin
tWall thicknessin
ShHoop stresspsi

Worked example

Internal pressure150 psi
Inside diameter12 in
Wall thickness0.25 in
Longitudinal stress (psi)1,800
Hoop stress (MPa)24.82
Diameter ÷ thickness48.0
  1. Sh=150×122×0.25=3,600

Hoop stress 3,600 psi

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the hoop stress in a 12-inch pipe with a 0.25-inch wall at 150 psi?

3,600 psi (about 24.82 MPa), with a longitudinal stress of 1,800 psi.

Why do pipes split lengthwise?

The hoop stress, which pulls the wall apart along its length, is twice the longitudinal stress.

Questions answered

Related calculators