Skip to content
FiftyCalc Free calculators for all 50 states

Hot Tub Cost Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the water volume, how much the water must warm up and what the heater draws. The electricity rate is an example; use the one on your bill.

Result

Sample figures

Running cost per month (30 days)—

Energy to heat a fresh fill (kWh) —

  • Cost to heat a fresh fill—
  • Energy used per day (kWh)—
  • Running cost per year (365 days)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Hot Tub Cost Calculator

Water volume (US gallons): enter 0 or more. Prefilled example: 400.

Temperature rise for a fresh fill (°F), e.g. 54 to 104: enter 0 or more. Prefilled example: 50.

Heater and pump power, in kW: enter 0 or more. Prefilled example: 5.5.

Hours the heater runs per day: enter a number from 0 to 24. Prefilled example: 3.

Electricity rate (cents per kWh), example value: enter 0 or more. Prefilled example: 17.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Water volume (US gallons): enter 0 or more.
  2. Temperature rise for a fresh fill (°F), e.g. 54 to 104: enter 0 or more.
  3. Heater and pump power, in kW: enter 0 or more.
  4. Hours the heater runs per day: enter a number from 0 to 24.
  5. Electricity rate (cents per kWh), example value: enter 0 or more.
  6. Read the result: Running cost per month (30 days); the panel also shows Energy to heat a fresh fill (kWh), Cost to heat a fresh fill, Energy used per day (kWh) and Running cost per year (365 days).

How this calculator works

Heating a fill: one BTU warms one pound of water by 1 °F, and a gallon of water weighs about 8.34 lb, so energy (BTU) = gallons × 8.34 × temperature rise. Dividing by 3,412.14 BTU per kWh gives kilowatt-hours (an electric resistance heater turns nearly all of it into heat).

Running cost = heater and pump power (kW) × hours per day × days × rate. The daily hours depend mostly on heat loss: a good insulated cover and a mild climate keep them low; check your heater's run time or a plug-in energy meter.

The formula

  1. Day=kw×hrs
  2. M=Day×30×r100
Symbols used in the formula
SymbolMeaningUnit
kwHeater and pump powerkW
hrsHours the heater runs per day
rElectricity rate (cents per kWh), example value
DayEnergy used per daykWh
MRunning cost per month (30 days)$

Worked example

Water volume (US gallons)400
Temperature rise for a fresh fill (°F), e.g. 54 to 10450
Heater and pump power5.5 kW
Hours the heater runs per day3
Electricity rate (cents per kWh), example value17
Energy to heat a fresh fill (kWh)48.88
Cost to heat a fresh fill$8.31
Energy used per day (kWh)16.50
Running cost per year (365 days)$1,024
  1. Day=5.5×3=16.5
  2. M=16.5×30×17100=84.15

Running cost per month (30 days) $84.15

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How much electricity does it take to heat a 400-gallon hot tub?

About 49 kWh to warm a fresh fill by 50 °F, roughly $8.31 at 17 cents per kWh.

How much does a hot tub cost to run per month?

A 5.5 kW heater running 3 hours a day uses 16.5 kWh a day, about $84 a month at 17 cents per kWh. Your own run time and rate decide the figure.

Questions answered

Related calculators