Skip to content
FiftyCalc Free calculators for all 50 states

Impact Energy Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Work out the energy an object carries into an impact, either after a fall or at a known speed, and the average force while it stops.

Result

Sample figures

Impact energy—J

Impact energy (ft·lbf) —

  • Impact speed (m/s)—
  • Average impact force over the stopping distance (N)—
  • Average impact force (lbf)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Impact Energy Calculator

Mass: enter 0 or more. Prefilled example: 5.

Mass unit

Mass unit: choose Kilograms (kg) or Pounds (lb). Prefilled example: Kilograms (kg).

You know

You know: choose The drop height or The impact speed. Prefilled example: The drop height.

Drop height (used if you know the height): enter 0 or more. Prefilled example: 2.

Height unit

Height unit: choose Meters (m) or Feet (ft). Prefilled example: Meters (m).

Impact speed (used if you know the speed): enter 0 or more. Prefilled example: 10.

Speed unit

Speed unit: choose m/s, mph, km/h or ft/s. Prefilled example: m/s.

Stopping distance, in cm: enter 0 or more. Prefilled example: 5.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Mass: enter 0 or more.
  2. Mass unit: choose Kilograms (kg) or Pounds (lb).
  3. You know: choose The drop height or The impact speed.
  4. Drop height (used if you know the height): enter 0 or more.
  5. Height unit: choose Meters (m) or Feet (ft).
  6. Impact speed (used if you know the speed): enter 0 or more.
  7. Speed unit: choose m/s, mph, km/h or ft/s.
  8. Stopping distance, in cm: enter 0 or more.
  9. Read the result: Impact energy; the panel also shows Impact energy (ft·lbf), Impact speed (m/s), Average impact force over the stopping distance (N) and Average impact force (lbf).

How this calculator works

Impact energy is the kinetic energy at contact, E = ½ × m × v². For a fall from height h without air resistance, it equals the potential energy lost, E = m × g × h, and the impact speed is v = √(2 × g × h).

Work-energy principle: if the object stops over a distance d, the average force during the stop is F = E ÷ d. Halving the stopping distance doubles the average force; peak forces are higher than the average.

g = 9.80665 m/s² (CODATA 2022 values from NIST (physics.nist.gov/cuu/Constants/Table/allascii.txt, read October 27, 2026)); 1 ft·lbf = 1.3558179 J and 1 lbf = 4.4482216 N (NIST SP 811, Appendix B.9 (nist.gov/pml/special-publication-811, read October 27, 2026)).

The formula

  1. E={m×μ×9.80665×h×huif mo=10.5×m×μ×(v×vu)2otherwise
Symbols used in the formula
SymbolMeaningUnit
mMass
μMass unit
moYou know (1: The drop height; 2: The impact speed)
hDrop height (used if you know the height)
huHeight unit
vImpact speed (used if you know the speed)
vuSpeed unit
EImpact energyJ

Worked example

Mass5
Mass unitKilograms (kg)
You knowThe drop height
Drop height (used if you know the height)2
Height unitMeters (m)
Impact speed (used if you know the speed)10
Speed unitm/s
Stopping distance5 cm
Impact energy (ft·lbf)72.3301
Impact speed (m/s)6.2631
Average impact force over the stopping distance (N)1,961.33
Average impact force (lbf)440.9245
  1. E=5×1×9.80665×2×1=98.0665

Impact energy 98.0665 J

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

Why does a soft landing reduce the force?

The same energy is spread over a longer stopping distance, and the average force is energy divided by that distance.

How much energy does a 5 kg object have after a 2 m fall?

About 98.07 J (72.33 ft·lbf), reaching about 6.26 m/s, ignoring air resistance.

Questions answered

Related calculators