Skip to content
FiftyCalc Free calculators for all 50 states

Impact Test Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Find the energy absorbed by a specimen in a pendulum impact test from the release angle and the angle the pendulum reaches after breaking it.

Result

Sample figures

Absorbed energy—J

Available energy (J) —

  • Absorbed energy (ft·lbf)—
  • Impact strength (kJ/m²)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Impact Test Calculator

Pendulum mass, in kg: enter 0 or more. Prefilled example: 20.

Distance from pivot to center of mass, in m: enter 0 or more. Prefilled example: 0.8.

Release angle from the vertical, in °: enter a number from 0 to 180. Prefilled example: 140.

Rise angle after impact, in °: enter a number from 0 to 180. Prefilled example: 60.

Specimen cross-section under the notch, in mm²: enter 0 or more. Prefilled example: 80.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Pendulum mass, in kg: enter 0 or more.
  2. Distance from pivot to center of mass, in m: enter 0 or more.
  3. Release angle from the vertical, in °: enter a number from 0 to 180.
  4. Rise angle after impact, in °: enter a number from 0 to 180.
  5. Specimen cross-section under the notch, in mm²: enter 0 or more.
  6. Read the result: Absorbed energy; the panel also shows Available energy (J), Absorbed energy (ft·lbf) and Impact strength (kJ/m²).

How this calculator works

Energy conservation for the pendulum: the absorbed energy is the drop in height of its center of mass between release and rise, E = m × g × L × (cos β − cos α), where α is the release angle and β the rise angle, both measured from the vertical.

This is the quantity reported by Charpy and Izod impact tests (ASTM E23 for metals); test machines also correct for friction and air losses, which this formula leaves out.

Impact strength = absorbed energy ÷ cross-section under the notch. g = 9.80665 m/s² (CODATA 2022 values from NIST (physics.nist.gov/cuu/Constants/Table/allascii.txt, read October 27, 2026)).

The formula

  1. E=m×9.80665×l×(cos⁡(rad⁡(b))−cos⁡(rad⁡(a)))
Symbols used in the formula
SymbolMeaningUnit
mPendulum masskg
lDistance from pivot to center of massm
aRelease angle from the vertical°
bRise angle after impact°
EAbsorbed energyJ
rad(x)the angle x, converted from degrees to radians.

Worked example

Pendulum mass20 kg
Distance from pivot to center of mass0.8 m
Release angle from the vertical140 °
Rise angle after impact60 °
Specimen cross-section under the notch80 mm²
Available energy (J)277.1037
Absorbed energy (ft·lbf)146.5171
Impact strength (kJ/m²)2,483.1309
  1. E=20×9.80665×0.8×(cos⁡(rad⁡(60))−cos⁡(rad⁡(140)))=198.65

Absorbed energy 198.6505 J

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What does a high absorbed energy mean?

The material is tough at that temperature: it absorbed a lot of energy before breaking, rather than snapping in a brittle way.

Why are impact tests run at several temperatures?

Many steels turn brittle below a transition temperature, and the absorbed energy drops sharply there.

Questions answered

Related calculators