Skip to content
FiftyCalc Free calculators for all 50 states

Inclined Plane Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Break down the forces on an object resting or sliding on a slope, and find its acceleration with friction.

Result

Sample figures

Acceleration down the slope (m/s², 0 if friction holds it)—

Weight (N) —

  • Force along the slope, m·g·sin θ (N)—
  • Normal force, m·g·cos θ (N)—
  • Friction force, μ·N (N)—
  • Ideal mechanical advantage (1 ÷ sin θ)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Inclined Plane Calculator

Mass: enter 0 or more. Prefilled example: 10.

Mass unit

Mass unit: choose Kilograms (kg) or Pounds (lb). Prefilled example: Kilograms (kg).

Slope angle, in °: enter a number from 0 to 90. Prefilled example: 30.

Coefficient of kinetic friction μ: enter 0 or more. Prefilled example: 0.2.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Mass: enter 0 or more.
  2. Mass unit: choose Kilograms (kg) or Pounds (lb).
  3. Slope angle, in °: enter a number from 0 to 90.
  4. Coefficient of kinetic friction μ: enter 0 or more.
  5. Read the result: Acceleration down the slope (m/s², 0 if friction holds it); the panel also shows Weight (N), Force along the slope, m·g·sin θ (N), Normal force, m·g·cos θ (N), Friction force, μ·N (N) and Ideal mechanical advantage (1 ÷ sin θ).

How this calculator works

On a slope at angle θ, the weight m·g splits into a part along the slope, m·g·sin θ, and a part pressing into it, the normal force N = m·g·cos θ. Kinetic friction opposes the motion with F = μ × N.

Newton's second law along the slope gives a = g × (sin θ − μ × cos θ). When this is zero or negative, friction is enough to stop the slide and the calculator shows 0.

Pushing a load up a frictionless ramp needs only m·g·sin θ, an ideal mechanical advantage of 1 ÷ sin θ. g = 9.80665 m/s² (CODATA 2022 values from NIST (physics.nist.gov/cuu/Constants/Table/allascii.txt, read October 27, 2026)).

The formula

  1. W=m×μ×9.80665
  2. Fp=W×sin⁡(rad⁡(th))
  3. Fn=W×cos⁡(rad⁡(th))
  4. Ff=k×Fn
  5. Acc=max⁡(0,Fp−Ffm×μ)
Symbols used in the formula
SymbolMeaningUnit
mMass
μMass unit
thSlope angle°
kCoefficient of kinetic friction μ
WWeight (N)
FpForce along the slope, m·g·sin θ (N)
FnNormal force, m·g·cos θ (N)
FfFriction force, μ·N (N)
AccAcceleration down the slope (m/s², 0 if friction holds it)
rad(x)the angle x, converted from degrees to radians.
max(a, b, …)the largest of the values.

Worked example

Mass10
Mass unitKilograms (kg)
Slope angle30 °
Coefficient of kinetic friction μ0.2
Weight (N)98.0665
Force along the slope, m·g·sin θ (N)49.0332
Normal force, m·g·cos θ (N)84.9281
Friction force, μ·N (N)16.9856
Ideal mechanical advantage (1 ÷ sin θ)2
  1. W=10×1×9.80665=98.0665
  2. Fp=98.0665×sin⁡(rad⁡(30))=49.0332
  3. Fn=98.0665×cos⁡(rad⁡(30))=84.9281
  4. Ff=0.2×84.9281=16.9856
  5. Acc=max⁡(0,49.0332−16.985610×1)=3.20476

Acceleration down the slope (m/s², 0 if friction holds it) 3.2048

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

At what angle does an object start to slide?

When tan θ exceeds the coefficient of static friction, for example above about 16.7° for μ = 0.3.

Does the mass change the acceleration down a slope?

No. Both the pull along the slope and the friction scale with mass, so the acceleration g(sin θ − μ cos θ) is the same for any mass.

Questions answered

Related calculators