Ladder Angle Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the working length of the ladder and how far its foot is from the wall; add a landing height to size the ladder.
Result
Base distance for the one-quarter ruleft
Angle of your ladder with the ground (degrees)
- Height of the top support (feet)
- Working length ÷ base distance (4 = one-quarter rule)
- Working length to reach the landing at the one-quarter rule (feet)
- With 3 feet above the landing (feet)
The unit choice applies to the fields you fill in. Results stay in the units written with them.
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
Affiliate link
This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.
Search Amazon for extension ladders. Visit Amazon
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Units: switches the fields between the two unit systems.
- Ladder working length, foot to top support, in ft: enter 0.01 or more.
- Distance of the foot from the wall, in ft: enter 0 or more.
- Height of the upper landing, in ft: enter 0 or more.
- Read the result: Base distance for the one-quarter rule; the panel also shows Angle of your ladder with the ground (degrees), Height of the top support (feet), Working length ÷ base distance (4 = one-quarter rule), Working length to reach the landing at the one-quarter rule (feet) and With 3 feet above the landing (feet).
How this calculator works
OSHA 29 CFR 1926.1053(b)(5)(i): non-self-supporting ladders are used at an angle such that the horizontal distance from the top support to the foot is approximately one-quarter of the working length. That puts the ladder at arccos(1/4) ≈ 75.52° from the ground; its height is √15 ÷ 4 ≈ 0.968 of the working length.
1926.1053(b)(1): ladders used to reach an upper landing extend at least 3 feet above it (or are secured with a grab device). Both paragraphs read on 2026-10-27 on the Cornell Legal Information Institute copy of the CFR (https://www.law.cornell.edu/cfr/text/29/1926.1053).
Your angle = arccos(base ÷ working length); height reached = √(length² − base²).
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Ladder working length, foot to top support | ft | |
| Base distance for the one-quarter rule | ft |
Worked example
| Ladder working length, foot to top support | 20 ft |
|---|---|
| Distance of the foot from the wall | 5 ft |
| Height of the upper landing | 12 ft |
| Angle of your ladder with the ground (degrees) | 75.52 |
|---|---|
| Height of the top support (feet) | 19.36 |
| Working length ÷ base distance (4 = one-quarter rule) | 4.00 |
| Working length to reach the landing at the one-quarter rule (feet) | 12.39 |
| With 3 feet above the landing (feet) | 15.39 |
Base distance for the one-quarter rule 5.00 ft
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
How far from the wall should a 20-foot ladder be?
One quarter of the working length: 5 feet, which sets it at about 75.5°.
What ladder do I need for a 12-foot roof edge?
12 ÷ 0.968 = 12.39 feet of working length to the edge, plus 3 feet above it: about 15.39 feet.