Skip to content
FiftyCalc Free calculators for all 50 states

Linear Actuator Force Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Find the push or pull a linear actuator needs to move a load along its axis, horizontal, vertical or on an incline.

Result

Sample figures

Required actuator force—N

Force without safety factor (N) —

  • Required actuator force (lbf)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Linear Actuator Force Calculator

Load mass: enter 0 or more. Prefilled example: 50.

Mass unit

Mass unit: choose Kilograms (kg) or Pounds (lb). Prefilled example: Kilograms (kg).

Angle of travel above horizontal (90 = vertical lift), in °: enter a number from 0 to 90. Prefilled example: 90.

Friction coefficient along the guide: enter 0 or more. Prefilled example: 0.

Acceleration, in m/s²: enter 0 or more. Prefilled example: 0.

Safety factor: enter 1 or more. Prefilled example: 1.5.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Load mass: enter 0 or more.
  2. Mass unit: choose Kilograms (kg) or Pounds (lb).
  3. Angle of travel above horizontal (90 = vertical lift), in °: enter a number from 0 to 90.
  4. Friction coefficient along the guide: enter 0 or more.
  5. Acceleration, in m/s²: enter 0 or more.
  6. Safety factor: enter 1 or more.
  7. Read the result: Required actuator force; the panel also shows Force without safety factor (N) and Required actuator force (lbf).

How this calculator works

Newton's second law along the actuator's axis: F = m × (g × sin θ + μ × g × cos θ + a), the component of the weight along the travel, plus friction on the guide, plus the force to accelerate the load. θ = 90° is a straight vertical lift, θ = 0° a horizontal push.

The result is multiplied by the safety factor you choose to cover mounting angles, lever arms and wear; check the actuator's dynamic and static load ratings. g = 9.80665 m/s² (CODATA 2022 values from NIST (physics.nist.gov/cuu/Constants/Table/allascii.txt, read October 27, 2026)).

The formula

  1. F0=m×μ×(9.80665×sin⁡(rad⁡(th))+k×9.80665×cos⁡(rad⁡(th))+a)
  2. F=F0×sf
Symbols used in the formula
SymbolMeaningUnit
mLoad mass
μMass unit
thAngle of travel above horizontal (90 = vertical lift)°
kFriction coefficient along the guide
aAccelerationm/s²
sfSafety factor
F0Force without safety factor (N)
FRequired actuator forceN
rad(x)the angle x, converted from degrees to radians.

Worked example

Load mass50
Mass unitKilograms (kg)
Angle of travel above horizontal (90 = vertical lift)90 °
Friction coefficient along the guide0
Acceleration0 m/s²
Safety factor1.5
Force without safety factor (N)490.3325
Required actuator force (lbf)165.3467
  1. F0=50×1×(9.80665×sin⁡(rad⁡(90))+0×9.80665×cos⁡(rad⁡(90))+0)=490.332
  2. F=490.332×1.5=735.499

Required actuator force 735.4988 N

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How much force lifts 50 kg straight up?

About 490.3 N to hold it, and 735.5 N (165.3 lbf) with a 1.5 safety factor.

Does a lid on a hinge need the same force?

No. A hinged lid adds lever arms, so the actuator force depends on where it attaches; this calculator covers a load moving along the actuator's line.

Questions answered

Related calculators