Skip to content
FiftyCalc Free calculators for all 50 states

Mohr's Circle Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Find the principal stresses and the maximum shear for a 2D (plane) stress state.

Result

Sample figures

Principal stress σ₁—

Center, average normal stress (σx + σy)/2 —

  • Radius = maximum in-plane shear stress—
  • Principal stress σ₂—
  • Principal angle θp from the x axis (degrees)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Mohr's Circle Calculator

Normal stress σx (MPa, psi or ksi; tension +): enter a number. Prefilled example: 80.

Normal stress σy (same unit): enter a number. Prefilled example: -40.

Shear stress τxy (same unit): enter a number. Prefilled example: 25.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Normal stress σx (MPa, psi or ksi; tension +): enter a number.
  2. Normal stress σy (same unit): enter a number.
  3. Shear stress τxy (same unit): enter a number.
  4. Read the result: Principal stress σ₁; the panel also shows Center, average normal stress (σx + σy)/2, Radius = maximum in-plane shear stress, Principal stress σ₂ and Principal angle θp from the x axis (degrees).

How this calculator works

Mohr's circle (Otto Mohr, 1882) for plane stress: center C = (σx + σy) ÷ 2 and radius R = √(((σx − σy) ÷ 2)² + τxy²). The principal stresses are σ₁,₂ = C ± R and the maximum in-plane shear stress is R.

The principal direction θp satisfies tan 2θp = 2τxy ÷ (σx − σy); the result here is the angle from the x axis to σ₁. Any consistent stress unit works.

The formula

  1. C=sx+sy2
  2. R=((sx−sy)÷2)2+t2
  3. S1=C+R
Symbols used in the formula
SymbolMeaningUnit
sxNormal stress σx (psi or ksi, tension +)MPa
syNormal stress σysame unit
tShear stress τxysame unit
CCenter, average normal stress (σx + σy)/2
RRadius = maximum in-plane shear stress
S1Principal stress σ₁

Worked example

Normal stress σx (MPa, psi or ksi; tension +)80
Normal stress σy (same unit)-40
Shear stress τxy (same unit)25
Center, average normal stress (σx + σy)/220
Radius = maximum in-plane shear stress65
Principal stress σ₂-45
Principal angle θp from the x axis (degrees)11.3099
  1. C=80+−402=20
  2. R=((80−−40)÷2)2+252=65
  3. S1=20+65=85

Principal stress σ₁ 85

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the shear stress on the principal planes?

Zero: principal planes carry only normal stress.

At what angle is the maximum shear?

45° from the principal directions (90° around Mohr's circle).

Questions answered

Related calculators