Skip to content
FiftyCalc Free calculators for all 50 states

Piston Force Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

A cylinder's force is the pressure times the piston area. Enter the pressure, the bore and the rod diameter for both strokes.

Result

Sample figures

Extend (push) force (lbf)—

Retract (pull) force (lbf) —

  • Extend force (N)—
  • Retract force (N)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Piston Force Calculator

Pressure: enter 0 or more. Prefilled example: 100.

Pressure unit

Pressure unit: choose psi, bar, kPa or MPa. Prefilled example: psi.

Bore (piston) diameter: enter 0 or more. Prefilled example: 2.

Rod diameter: enter 0 or more. Prefilled example: 0.625.

Diameter unit

Diameter unit: choose inches (in) or millimeters (mm). Prefilled example: inches (in).

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Pressure: enter 0 or more.
  2. Pressure unit: choose psi, bar, kPa or MPa.
  3. Bore (piston) diameter: enter 0 or more.
  4. Rod diameter: enter 0 or more.
  5. Diameter unit: choose inches (in) or millimeters (mm).
  6. Read the result: Extend (push) force (lbf); the panel also shows Retract (pull) force (lbf), Extend force (N) and Retract force (N).

How this calculator works

Force F = p × A. Extending, the pressure acts on the whole piston, A = π D² ÷ 4 with D the bore. Retracting, the rod takes up part of the area, so A = π (D² − d²) ÷ 4 with d the rod diameter.

These are theoretical forces: seal friction and, in pneumatics, pressure drop in the lines lower the usable force, so designers often apply a margin.

Unit conversions: NIST Special Publication 811, Appendix B (nist.gov, read October 27, 2026). 1 psi = 6,894.757 Pa, 1 bar = 100,000 Pa, 1 lbf = 4.4482216152605 N, 1 in = 0.0254 m.

The formula

  1. Fe=p×pu×π×(b×du)2÷44.4482216152605
Symbols used in the formula
SymbolMeaningUnit
pPressure
puPressure unit
bBore (piston) diameter
duDiameter unit
FeExtend (push) forcelbf

Worked example

Pressure100
Pressure unitpsi
Bore (piston) diameter2
Rod diameter0.625
Diameter unitinches (in)
Retract (pull) force (lbf)283.4796
Extend force (N)1,397.45
Retract force (N)1,260.9803
  1. Fe=100×6,894.76×3.14159×(2×0.0254)2÷44.4482216152605=314.159

Extend (push) force (lbf) 314.1593

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What force does a 2-inch bore give at 100 psi?

About 314.16 lbf pushing; with a 5/8-inch rod, about 283.48 lbf pulling.

Why is the pull force smaller?

The rod covers part of the piston on the rod side, so less area is pushed by the pressure.

Questions answered

Related calculators