Skip to content
FiftyCalc Free calculators for all 50 states

Piston Speed Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Mean piston speed is how fast, on average, a piston travels up and down the cylinder. Enter the stroke and the engine speed.

Result

Sample figures

Mean piston speed (ft/min)—

Mean piston speed (m/s) —

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Piston Speed Calculator

Stroke length: enter 0 or more. Prefilled example: 3.48.

Stroke unit

Stroke unit: choose inches (in) or millimeters (mm). Prefilled example: inches (in).

Engine speed, in RPM: enter 0 or more. Prefilled example: 6,000.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Stroke length: enter 0 or more.
  2. Stroke unit: choose inches (in) or millimeters (mm).
  3. Engine speed, in RPM: enter 0 or more.
  4. Read the result: Mean piston speed (ft/min); the panel also shows Mean piston speed (m/s).

How this calculator works

Mean piston speed = 2 × stroke × RPM ÷ 60: the piston covers the stroke twice (up and down) in each crankshaft turn.

The piston's peak speed, near mid-stroke, is higher than this average by an amount that depends on the rod length. Engine builders use mean piston speed to compare how hard engines of different sizes are run.

Unit conversions: NIST Special Publication 811, Appendix B (nist.gov, read October 27, 2026). 1 in = 0.0254 m, 1 ft = 0.3048 m.

The formula

  1. Fpm=2×s×su×rpm÷600.3048×60
Symbols used in the formula
SymbolMeaningUnit
sStroke length
suStroke unit
rpmEngine speedRPM
FpmMean piston speed (ft/min)

Worked example

Stroke length3.48
Stroke unitinches (in)
Engine speed6,000 RPM
Mean piston speed (m/s)17.6784
  1. Fpm=2×3.48×0.0254×6,000÷600.3048×60=3,480

Mean piston speed (ft/min) 3,480

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the piston speed of a 3.48-inch stroke at 6,000 RPM?

3,480 ft/min, about 17.68 m/s.

Does a longer stroke mean a higher piston speed?

Yes, at the same RPM. That is one reason long-stroke engines usually rev lower.

Questions answered

Related calculators