Skip to content
FiftyCalc Free calculators for all 50 states

Polar Moment of Inertia Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

The polar moment of inertia J measures how a round shaft resists twisting. Enter the outer diameter, and the inner diameter for a tube.

Result

Sample figures

Polar moment of inertia J (unit⁴)—

Polar section modulus J ÷ (D/2) (unit³) —

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Polar Moment of Inertia Calculator

Outer diameter D (in, mm or any unit): enter 0 or more. Prefilled example: 2.

Inner diameter d (same unit; 0 for a solid shaft): enter 0 or more. Prefilled example: 0.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Outer diameter D (in, mm or any unit): enter 0 or more.
  2. Inner diameter d (same unit; 0 for a solid shaft): enter 0 or more.
  3. Read the result: Polar moment of inertia J (unit⁴); the panel also shows Polar section modulus J ÷ (D/2) (unit³).

How this calculator works

For a round section, J = π (D⁴ − d⁴) ÷ 32, where D is the outer and d the inner diameter (d = 0 for a solid shaft). J has units of length to the fourth power, in whatever unit the diameters use.

In torsion, shear stress τ = T × r ÷ J and the twist angle φ = T L ÷ (G J), with T the torque, r the radius, L the length and G the shear modulus. The polar section modulus J ÷ (D/2) gives the peak stress directly: τ_max = T ÷ (J ÷ (D/2)).

The formula

  1. J=π×(dd4−di4)32
Symbols used in the formula
SymbolMeaningUnit
ddOuter diameter D (mm or any unit)in
diInner diameter d (0 for a solid shaft)same unit
JPolar moment of inertia J (unit⁴)

Worked example

Outer diameter D (in, mm or any unit)2
Inner diameter d (same unit; 0 for a solid shaft)0
Polar section modulus J ÷ (D/2) (unit³)1.5708
  1. J=3.14159×(24−04)32=1.5708

Polar moment of inertia J (unit⁴) 1.5708

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is J for a 2-inch solid shaft?

About 1.5708 in⁴.

Why are hollow shafts used?

Material near the center adds little to J, so removing it saves weight with a small loss of stiffness.

Questions answered

Related calculators