Skip to content
FiftyCalc Free calculators for all 50 states

Principal Stress Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Any plane stress state has two directions with no shear, the principal directions. Enter the normal and shear stresses on the x and y faces.

Result

Sample figures

Maximum principal stress σ₁—

Minimum principal stress σ₂ —

  • Maximum in-plane shear stress—
  • Principal angle θp from the x axis (degrees)—
  • von Mises equivalent stress—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Principal Stress Calculator

Normal stress σx (MPa, ksi or any unit; tension +): enter a number. Prefilled example: 80.

Normal stress σy (same unit): enter a number. Prefilled example: -40.

Shear stress τxy (same unit): enter a number. Prefilled example: 30.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Normal stress σx (MPa, ksi or any unit; tension +): enter a number.
  2. Normal stress σy (same unit): enter a number.
  3. Shear stress τxy (same unit): enter a number.
  4. Read the result: Maximum principal stress σ₁; the panel also shows Minimum principal stress σ₂, Maximum in-plane shear stress, Principal angle θp from the x axis (degrees) and von Mises equivalent stress.

How this calculator works

Principal stresses in plane stress (Mohr's circle): σ₁,₂ = (σx + σy) ÷ 2 ± √(((σx − σy) ÷ 2)² + τxy²). The circle's radius is the maximum in-plane shear stress.

The principal angle satisfies tan 2θp = 2τxy ÷ (σx − σy); θp is measured counterclockwise from the x axis to the σ₁ direction. Von Mises stress for plane stress: σ_vm = √(σ₁² − σ₁σ₂ + σ₂²), compared with the yield strength in the distortion-energy criterion.

All stresses use the same unit; tension is positive and compression negative.

The formula

  1. S1=sx+sy2+((sx−sy)÷2)2+txy2
Symbols used in the formula
SymbolMeaningUnit
sxNormal stress σx (ksi or any unit, tension +)MPa
syNormal stress σysame unit
txyShear stress τxysame unit
S1Maximum principal stress σ₁

Worked example

Normal stress σx (MPa, ksi or any unit; tension +)80
Normal stress σy (same unit)-40
Shear stress τxy (same unit)30
Minimum principal stress σ₂-47.082
Maximum in-plane shear stress67.082
Principal angle θp from the x axis (degrees)13.2825
von Mises equivalent stress117.8983
  1. S1=80+−402+((80−−40)÷2)2+302=87.082

Maximum principal stress σ₁ 87.082

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What are the principal stresses for σx = 80, σy = −40, τxy = 30 MPa?

About 87.08 MPa and −47.08 MPa, with a maximum shear of about 67.08 MPa.

Is there shear on the principal planes?

No. By definition the shear stress is zero on the principal planes; maximum shear acts on planes at 45° to them.

Questions answered

Related calculators