Skip to content
FiftyCalc Free calculators for all 50 states

Projector Throw Distance Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter your projector's throw ratio and the screen size you want to get the distance from lens to screen.

Result

Sample figures

Throw distance—ft

Image width (in) —

  • Image height (in)—
  • Throw distance (m)—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Projector Throw Distance Calculator

Units: switches the fields between the two unit systems.

Throw ratio (distance ÷ image width, from the projector's specs): enter 0.01 or more. Prefilled example: 1.5.

Screen diagonal, in in: enter 1 or more. Prefilled example: 100.

Aspect ratio width (16 for 16:9): enter 1 or more. Prefilled example: 16.

Aspect ratio height (9 for 16:9): enter 1 or more. Prefilled example: 9.

Affiliate link

This is an affiliate link: FiftyCalc may earn a commission if you buy through it. This does not change the result.

Aurzen sells home projectors. Visit Aurzen

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Throw ratio (distance ÷ image width, from the projector's specs): enter 0.01 or more.
  3. Screen diagonal, in in: enter 1 or more.
  4. Aspect ratio width (16 for 16:9): enter 1 or more.
  5. Aspect ratio height (9 for 16:9): enter 1 or more.
  6. Read the result: Throw distance; the panel also shows Image width (in), Image height (in) and Throw distance (m).

How this calculator works

Throw distance = throw ratio × image width. Image width = diagonal × a ÷ √(a² + b²) for an a:b screen, and height = diagonal × b ÷ √(a² + b²).

Inches become feet at 12 per foot and meters at 0.0254 m per inch (exact, NIST SP 811 Appendix B, read 2026-10-27). Zoom lenses have a range of throw ratios; run the calculation at both ends.

The formula

  1. W=d×awaw2+ah2
  2. Ft=r×W12
Symbols used in the formula
SymbolMeaningUnit
rThrow ratio (distance ÷ image width, from the projector's specs)
dScreen diagonalin
awAspect ratio width (16 for 16:9)
ahAspect ratio height (9 for 16:9)
WImage widthin
FtThrow distanceft

Worked example

Throw ratio (distance ÷ image width, from the projector's specs)1.5
Screen diagonal100 in
Aspect ratio width (16 for 16:9)16
Aspect ratio height (9 for 16:9)9
Image width (in)87.1576
Image height (in)49.0261
Throw distance (m)3.3207
  1. W=100×16162+92=87.1576
  2. Ft=1.5×87.157612=10.8947

Throw distance 10.8947 ft

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How far should a 1.5 throw ratio projector be from a 100 in 16:9 screen?

About 10.89 ft (3.32 m): the image is 87.16 in wide.

What does a short-throw ratio mean?

A ratio below about 1 puts the projector closer: at 0.5 the distance is half the image width.

Related calculators