Skip to content
FiftyCalc Free calculators for all 50 states

Prop Pitch Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Propeller pitch is how far one turn would push the boat with no slip. Enter the speed you want, the engine RPM, the gear ratio and the slip you expect.

Result

Sample figures

Propeller pitch—in

Propeller shaft speed (RPM) —

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Prop Pitch Calculator

Target boat speed, in mph: enter 0 or more. Prefilled example: 35.

Engine speed at that speed, in RPM: enter 0 or more. Prefilled example: 5,000.

Lower unit gear ratio (x:1): enter 0 or more. Prefilled example: 2.

Expected propeller slip, in percent: enter a number from 0 to 99. Prefilled example: 10.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Target boat speed, in mph: enter 0 or more.
  2. Engine speed at that speed, in RPM: enter 0 or more.
  3. Lower unit gear ratio (x:1): enter 0 or more.
  4. Expected propeller slip, in percent: enter a number from 0 to 99.
  5. Read the result: Propeller pitch; the panel also shows Propeller shaft speed (RPM).

How this calculator works

Theoretical speed (mph) = pitch (in) × engine RPM ÷ gear ratio ÷ 1,056, because 1 mile = 63,360 inches and 1 hour = 60 minutes (63,360 ÷ 60 = 1,056). Real speed is lower by the slip: speed = theoretical × (1 − slip).

Solving for pitch: pitch = speed × gear ratio × 1,056 ÷ (RPM × (1 − slip)). Slip varies with hull, load and propeller; measure it with the prop slip calculator on a known run rather than guessing.

The formula

  1. P=s×g×1,056rpm×(1−sl÷100)
Symbols used in the formula
SymbolMeaningUnit
sTarget boat speedmph
rpmEngine speed at that speedRPM
gLower unit gear ratio (x:1)
slExpected propeller slip%
PPropeller pitchin

Worked example

Target boat speed35 mph
Engine speed at that speed5,000 RPM
Lower unit gear ratio (x:1)2
Expected propeller slip10%
Propeller shaft speed (RPM)2,500
  1. P=35×2×1,0565,000×(1−10÷100)=16.4267

Propeller pitch 16.4267 in

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What pitch gives 35 mph at 5,000 RPM with a 2:1 gear and 10% slip?

About 16.43 inches, so a 16- or 17-inch pitch would be tried.

Does more pitch always mean more speed?

Only if the engine can still reach its rated RPM; too much pitch drags the RPM down and can lose speed.

Questions answered

Related calculators