Skip to content
FiftyCalc Free calculators for all 50 states

Pulley Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

A pulley system shares the load among several rope segments. Enter the load, the number of segments holding the moving block and the efficiency.

Result

Sample figures

Pulling force needed (same unit as the load)—

Actual mechanical advantage —

  • Rope to pull (same unit as the height)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Pulley Calculator

Load to lift (lb, kg or N): enter 0 or more. Prefilled example: 500.

Rope segments supporting the moving block: enter 1 or more. Prefilled example: 4.

Overall efficiency (100 = ideal, no friction), in percent: enter a number from 1 to 100. Prefilled example: 100.

Height to lift the load (ft or m): enter 0 or more. Prefilled example: 2.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Load to lift (lb, kg or N): enter 0 or more.
  2. Rope segments supporting the moving block: enter 1 or more.
  3. Overall efficiency (100 = ideal, no friction), in percent: enter a number from 1 to 100.
  4. Height to lift the load (ft or m): enter 0 or more.
  5. Read the result: Pulling force needed (same unit as the load); the panel also shows Actual mechanical advantage and Rope to pull (same unit as the height).

How this calculator works

For an ideal block and tackle, the mechanical advantage equals the number of rope segments n supporting the moving block, so the effort is F = W ÷ n. Count only segments attached to or running through the moving block.

Work is conserved: to lift the load by h you pull n × h of rope. Friction in the sheaves lowers the advantage; enter an efficiency below 100% to account for it. The rope and anchors still carry the full load and more.

The formula

  1. Ef=l÷neff÷100
Symbols used in the formula
SymbolMeaningUnit
lLoad to lift (kg or N)lb
nRope segments supporting the moving block
effOverall efficiency (100 = ideal, no friction)%
EfPulling force needed (same unit as the load)

Worked example

Load to lift (lb, kg or N)500
Rope segments supporting the moving block4
Overall efficiency (100 = ideal, no friction)100%
Height to lift the load (ft or m)2
Actual mechanical advantage4
Rope to pull (same unit as the height)8
  1. Ef=500÷4100÷100=125

Pulling force needed (same unit as the load) 125

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How hard must I pull to lift 500 lb with 4 supporting segments?

125 lb in an ideal system, or about 138.89 lb at 90% efficiency.

Does a single fixed pulley reduce the force?

No. It only changes the direction of the pull; its mechanical advantage is 1.

Questions answered

Related calculators