Skip to content
FiftyCalc Free calculators for all 50 states

Roll Length Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Measure the outside diameter of the roll, the core diameter and the material thickness, all in inches.

Result

Sample figures

Length on the roll—ft

Length on the roll (inches) —

  • Number of wraps (about)—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Roll Length Calculator

Units: switches the fields between the two unit systems.

Outside diameter of the roll, in in: enter 0 or more. Prefilled example: 10.

Core diameter, in in: enter 0 or more. Prefilled example: 3.

Material thickness, in in: enter 1e-05 or more. Prefilled example: 0.004.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Outside diameter of the roll, in in: enter 0 or more.
  3. Core diameter, in in: enter 0 or more.
  4. Material thickness, in in: enter 1e-05 or more.
  5. Read the result: Length on the roll; the panel also shows Length on the roll (inches) and Number of wraps (about).

How this calculator works

The material's cross-section on the roll is a ring of area π × (D² − d²) ÷ 4. Unrolled, the same area is length × thickness, so length = π × (D² − d²) ÷ (4 × t).

The result assumes tight winding; air between layers makes the real length a little shorter. Thickness can be found by measuring a stack (see the paper thickness calculator).

The formula

  1. In=π×(D2−d22)4×t
  2. Ft=In12
Symbols used in the formula
SymbolMeaningUnit
DOutside diameter of the rollin
d2Core diameterin
tMaterial thicknessin
InLength on the rollinches
FtLength on the rollft

Worked example

Outside diameter of the roll10 in
Core diameter3 in
Material thickness0.004 in
Length on the roll (inches)17,867.8082
Number of wraps (about)875
  1. In=3.14159×(102−32)4×0.004=17,867.81
  2. Ft=17,867.8112=1,488.98

Length on the roll 1,488.984 ft

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How long is a 10-inch roll of 4-mil material on a 3-inch core?

About 17,868 inches, or 1,489 feet.

Why does the formula use diameters squared?

Because the length is proportional to the area of the ring of material, not to its width.

Questions answered

Related calculators