Section Modulus Calculator
Test cases replayed : 4 of 4 match · Methodology · No outside source listed
Choose a cross-section, enter its dimensions in one length unit, and get the elastic section modulus S = I ÷ c.
Result
Elastic section modulus S (length³)
Moment of inertia I (length⁴)
- Distance to the outer fiber c (length)
- Bending stress σ = M ÷ S (force per length²)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Cross-section: choose Solid rectangle (width b, height h), Solid circle (diameter D), Round tube (outer D, inner d) or Rectangular tube (outer b × h, inner bi × hi).
- Width b (rectangles): enter 0 or more.
- Height h, in the bending direction (rectangles): enter 0 or more.
- Outer diameter D (circle, tube): enter 0 or more.
- Inner diameter d (round tube): enter 0 or more.
- Inner width bi (rectangular tube): enter 0 or more.
- Inner height hi (rectangular tube): enter 0 or more.
- Bending moment, optional (force × same length unit): enter 0 or more. Optional, under “Bending moment”.
- Read the result: Elastic section modulus S (length³); the panel also shows Moment of inertia I (length⁴), Distance to the outer fiber c (length) and Bending stress σ = M ÷ S (force per length²).
How this calculator works
S = I ÷ c, with I the second moment of area about the bending axis and c the distance from that axis to the outermost fiber. Rectangle: I = bh³/12, so S = bh²/6. Solid circle: I = πD⁴/64, S = πD³/32. Round tube: I = π(D⁴ − d⁴)/64. Rectangular tube: I = (bh³ − bi·hi³)/12.
Bending stress at the outer fiber is σ = M ÷ S (flexure formula of beam theory). Use one consistent unit: inches give in³, with lbf·in giving psi.
Worked example
| Cross-section | Solid rectangle (width b, height h) |
|---|---|
| Width b (rectangles) | 2 |
| Height h, in the bending direction (rectangles) | 6 |
| Outer diameter D (circle, tube) | 3 |
| Bending moment, optional (force × same length unit) | 0 |
| Moment of inertia I (length⁴) | 36 |
|---|---|
| Distance to the outer fiber c (length) | 3 |
| Elastic section modulus S (length³) | 12 |
| Bending stress σ = M ÷ S (force per length²) | 0 |
Frequently asked questions
What is the section modulus of a 2 × 6 in rectangle on edge?
12 in³: 2 × 6² ÷ 6.
What is the difference between elastic and plastic section modulus?
The elastic modulus (this one) gives the stress where the outer fiber first yields; the plastic modulus describes a fully yielded section and is larger.